When trying to open a *.bnt file, the BACnet Configurator does not open correctly. In the taskbar an icon appears but you can not open the configuration on a computer with Windows 7 as operating syste
The instruction nslookup allows to find out the TCP/IP address of a public e-mail server.
This error occurs only on PCs equipped with Win7 64 bit and PG5 1.4 where the hardwaer configuration is done with the help of the Device Configurator.
In PG5 1.4 comments with more than 80 characters where possible, but PG5 2.0.110 does not accept these comments any more.
In case the option "All elements" is activated in the HMI Editor the PG5 project does not work on a PCD1.M2120. After the download of the project, the PCD1 will not go in RUN but remain in Halt with t
After execution CSF the error flag is set.
If you have build, download a program into the PCD and when you try to open the graftec file you get the message: Everithing is OK ! Can't open the active transition. This a Graftec bug which happen
In case more than 32 PCDs are to be connected to a PC using serial connections (with one COM port for every PCD station) PG5 needs to be configured to allow more than 32 COM ports to be used by the SC
With firmware 1.12.01 for the VGA panel (PCD7.D4xxV) it is not possible anymore to choose the numeric keyboard as default. At every power off/on this setting is lost.
