Yes, PG5 2.0 and PG5 2.1 are fully compatible with the 32 and 64-bit version of Windows Vista, Windows 7 ("Windows 7 professional" and "Windows 7 home premimum edition") and Windows 8. PG5 1.4 is co
If the Display PCD7.D23x is configured in BUS Mode RS 485 the backlight is never on at the first page.
When working with PG5 V1.4.100 (first edition), changed public symbols are not updated in all project files.
In 2007 the analogue input modules PCD2.W1xx have been discontinued. This FAQ suggests possible replacement modules depending on the measured signals and the required resolution.
Due to a restriction of the firmware before SV 1.08 of the PCD7.L60x room controllers, the Fan Speed output of the devices in RIO mode are not working correctly. This phenomenon can also occur if a to
By default, the outputs of a the modules mounted on a PCD3.T360 RIO will be reset on bus failure (or if the master is in STOP or HALT). This is the general defualt behaviour on Profubus DP networks th
The error above appears when opening the project created in PG5 1.3 with PG5 1.4
In some occasions (e.g. the Technology Camp 2011) it was recommended to the participants of the meeting to install the latest PG5 2.0 version in parallel to the PG5 2.0.150. Please note that once PG5
The first time the MicroBrowser on a CE Panel (PCD7.D5xxx) is launched, it prompts for the start page to be opened. But if the checkbox "ask me again" once has been unchecked, there is no more prompt
No, it's not allowed to load a PCD3 xx7 with a firmware SBC standard operation system.
