The latest firmware versions for PCS1 require a boot version of 090 or more recent to be downloaded. PCS1 with hardware version E (original FW version 0A1, produced after April 2004) are already equip
This phenomenon could be caused by a missing power supply or if the current consumption of the I/O modules exceeds the maximum supply of the extension module. A missing jumper inside the PCD3.C200 can
Yes, PG5 1.4 is compatible with Microsoft Windows Vista , Windows Server 2008, Windows 7 and Windows 8 (with the exception that the BACnet Configurator is only supporting the 32bit versions of the abo
The last Version is V1.2 (1989). Please read the attachment document.
The PCD4 product family has been phased-out by the end of 2008. The repair service is guaranteed until 31.12.2013 (except of modules which have already been phased-out earlier).
Here are some important mounting instructions to prevent Touch Screen from breaking.
To write/clear the counter value in the H104S/SE, the F-Box "H104S/SE Set" must be used.
FAQ #101004 describes how to launch the Microsoft IE in the kiosk mode. But without additional settings the scrollbars are always displayed on the browser.
Originally it wasn't foreseen to connect an external modem to the port 0 of the PCS1. However, in special cases it might be useful having the possibility of sending SMS messages with an external modem
On the PCD the bus has the lables D and /D, and EnOcean devices do have lable A and B. How should they be connected together?
