If the option "warn on symbols with same type or value" is activated, the HMI editor will probably create several warnings.
If all alarms are acknowleged the General Acknowleg Flag should disappear. It can happen, that a flag is still high and therefore it doesn't disappear.
During the first half year of 2011 several GSM modems with a firmware V3.0x have been delivered. These modems are not 100% compatible to the previous version with firmware V2.xx.
If under Settings/Software/Advanced the option: no "Software Settings" file is activated this error can appear.
In case a current transformator and a transfomer ration other than 1 (5:5) is used for measuring the energy with an AWD3 (with Serial-S-Bus interface) the FBox from the library 2.6.156 or older do not
With the DDC Suite version 2.6.172 (or 2.5.172 for PG5 1.4) the FBox "System hot water 2.0" (in German: "Anlage WWB 2.0") did not switch off even after the "temperature limit during disinfection" has
The "Send SMS Indirect" F-Box version 2.5.300 does generate the following warning on PG5, and the "$R, $L, @L…." syntax in the texts which should be sent as a SMS are not interpreted correctly:
There are several reasons to use the FBox "SASI S-Bus Extended" (see FAQ 101400). But there is a limitation that it is not possible to use this FBox for re-assigning a port as Gateway master port on S
There has been a bug in the FPGA versions older than HD6 that caused the FB Home not to work if a limit switch was active on power up of the PCD.
The Error LED of the PCD2.M127 does blink in case a PCD2.F7xx module is configured but the communication (Profibus or LON) is not working (e.g. because the module itself or a configured Profibus DP sl
