If a modem is installed on port 3 and the default standby mode "S-BUS PGU" is choosen in modem driver f-box the error: "Stanby mode OFF must be used with reduced handshake (port 3)." "Fatal Error 20:
This error appears if resources used in the HMI Editor do not exist in the FUPLA global symbol list.
It is possible to convert all the variable from a S-Bus driver to Ether S-Bus driver if an existing project has to be used on another terminal type (e.g. PCD7.D786 convert to PCD7.D786ET)!
Yes it is possible to be Master on the Profibus DP Master modul PCD7.D750 and Slave on the Profi S-I/O port. Otherwise there is a bug in PG5 which generates an error on compiling.
Probably the property of the referenced Object is not setup to be writable.
The PCD3.C110Z09 and the PCD3.C200Z09 are designed for the direct connection to a PCD3 Compact (PCD3.M2x3xV6) or a PCD3 WAC with a PCD3.K010.
It has always been possible to configure password levels in the Settings tab of the Web Builder. This configuration has been moved from the Web Builder to the Device Configurator if when le firmware v
A PCD7.D7xx Terminal can access several PCD's in an S-Bus network, it is as well possible to have one gateway station in the network and access PCD's that are located in a subnet. The response timeout
Yes, this is possible starting from the EIB FBox library version $2.5.302.
