If you want to use the S-Bus OPC-Server and PG5 on the same PC then you have to make attention to use the correct version of the S-Bus OPC-Server which fit with the corresponding version of the scommd
Attached to this FAQ you will find a document that describes the symbol naming conventions to be obeyed by PG5 users (and especially by FBox developers). Further on, the document contains a summary o
The resources (registers, flags, timers, counters etc) and possibly the user program and the text strings/DBs on a PCD3.M3xx0 are stored in RAM. To ensure that they are not lost and that the hardware
Instead of the maximal value it is just possible to set the minimal value twice.
If all alarms are acknowleged the General Acknowleg Flag should disappear. It can happen, that a flag is still high and therefore it doesn't disappear.
The article 450748150 is no longer available from Saia-Burgess Controls AG as the according displays have been phased-out. However, this article can be bought from other providers (it is a Lithium bat
Each new F-Box has the name Module. That is the reason for the multi-defined symbols.
after autostart Microbrowser I can't open the werbserver configuration menu
After Updating the Memory Management FBox included in the File System library update V2.7.310, the Output Error is set and the FBox LED is red with an "A" inside.
Note that a Modem in PGU mode needs always a full RS 232 port.
