In some PCD3 WAC projects where the PPP- and GPRS-diagnostic FBoxes of the Wide Area Automation library (WAA library) are used the following problem was observed: After program download and setting t
It is possible to configure the onboard inputs and outputs of the PCD3.M2xxx with the "device configurator". A download of this configuration is not stored.
Because of a wrong formatting of the MAC addresses printed on the stickers delivered together with PCD3 systems (with Ethernet option), leading zeros have sometimes been omitted.
To use the internal flash memory with file system on a PCD3 Compact (e.g. M2130V6), at least firmware version 1.08.12 is necessary!
Since the Micorbrowser does not support every function of the Internet Explorer it can be necessary to open the Internet Explorer for some specific operations.
An external device like scada or supervision sytem can know the status of the PCD (Run, Halt, Stop or Conditioanl Run) by using a special item of the S-Bus OPC-Server or by using a special S-Bus teleg
Before you can use the SYSWR K 3100 and K 3101 calls, the onboard Flash first has to be partitioned.
When choosing the dynamic registers above 8191 on a PCD2.M5xx0, a PCD2.M480 or a PCD3, this error message can appear in case FBoxes are used which apply "indirect instructions".
The PCD3.M3xxx, PCD3.M5xxx and PCD3.M6xxx do feature different possibilities for using the port 10 (D-Sub connector) and port 2 (terminal block).
