If the S-Web Editor detects a painter (graphical object in the view) that does have invalid dimension or position, a warning message will be shown. This message does also offer to correct the invalid
If during the installation of PG5 1.4 or SBC.Net Web-Connect there is an Error message: "Error 1606. Could not access network location WINDIR\system32", there could be two reasons for the cause.
Yes, this is possible and makes sense when connecting with the same PC to several Webservers.
In seltenen Fällen ist die Ether-S-Bus Kommunikation bei Programmen die aus PG5 2.0 oder 2.1.200 in die PG5 2.1.210 importiert wurden nach einem Rebuild All und anschließendem Download nicht mehr in F
Using an indirect connection of the web-connect software on the CE web-panel (PCD7.D5xxx) it’s possible that a remote PC is able to load the web-pages stored on the PCD/PCS.
The analogue input modules PCD2.W745 and PCD3.W745 do have a terminal 16 (GND) which is not documented in version 1 of the manual 27/796.
You try to access a File on the Web-Server of the PCD with the HTTP protocol e.g. with an Internet Browser. The Web-Server responds with the Error message File not found. (HTTP 404 Not found)
it's very important to use the firmware $0H or higher on the PCD7.F650 in combination with a PCD2.M480.
A HDlog macro has been added in a project but it isn't possible to enter the variables because the option to Add a "SBC HDlog files" in the Project Configuration window (Menu: Project / Project Config
It is possible to send SMS by sending Emails to a provider that will transfer them to SMS messages. This requires an Internet connection (DSL, or GPRS / UMTS)
