The S-WebConnect 2.x (distributed together with PG5 1.4.300) does require the Microsoft .Net Framework 2.0. If the .Net Framework is not installed the S-WebConnect 2.x fails to start.
When you use HTML tags in csv-file with the S-Web Editor 5.14.27, unused tags in *.csv files are detected (and the S-Web Editor asks whether to delete these lines in order to increase the performance
If there is a SIO-Master and a DP-Master configured the SIO-Master does not go in the "Operate" state to make the data exchange.
With firmware 1.08.21 of the PCD2.M480 the gateway could get blocked in some specific cases.
A Profi S-I/O Network is communicating properly. When the ESA terminal is connected to the networt too, the Bus stops for a while.
In case a build of a PG5 project containing the "HDLog File" FBoxes fails with the compiler error "Symbol not defined: __stc_id_00000_..." there are two possible reasons: 1. A wrong version of "HDLog
In case the PG5 2.0 FBox library version 2.6.150/151 (or PG5 1.4 version 2.5.100/101) is used the change from "autonomous" to "slave" mode does not work correctly. This problem is corrected in the PG5
In some cases it is possible that a PCD7.F7500 is not correctly detected on a PCD2.M5540 with hardware version 'C' without modification '6'.
In case of high environment temperatures together with a configuration of very low frequencies, the PCD2.H210 or the PCD3.H210 could generate an incorrect amount of output pulses.
In case a PCD2.R6000 (with a hardware version / modification before B1) is plugged on a PCD2.M5 which is extended with a PCD2.C2000 the file system on the SD card is not accessible.
