The default Timeout on Profi-S-Bus is baudrate related: Baudrate 9'600 Baud: 500 ms 93,75 kBaud: 500 ms 187,5 kBaud: 250 ms 500 kBaud: 250 ms 1,5 MBaud: 100 ms
There is a problem with the Westermo-Modem TD-35 when using other baudrates than 9600. Westermo will correct it.
The first generation of PCDs with integrated S-Web server did not support http-direct (e.g. the PCD1.M125, PCD1.M135, PCD2.M150, PCD2.M170, PCD2.M480) . Therefore the access of the S-Web Server must b
L60x Config, L60x Room FBoxes indicates that everything is ok: The FBox LED is green, but there is no actualisation of the values in the roomcontrollers. It's not possible to modify any parameter
In some situations it is possible that the FBox "HDLog to File" is writing the same values several times (even if no change of value has been detected) to the *.csv file.
On web pages generated by the Web Editor containing many PPOs it may occur that the PPO values aren't shown but "No Message: ge" (instead of "ge" the unit unit of the PPO may be shown as well) is dis
The online paramters of the "Call SMS" FBox should be adapted in runtime. Per example inserting another destination for the "Call SMS" FBox. For some reason the updating of the callnumbers is not work
The instruction CODEBASE allows to define where the java applet file "IMasterSaia_x.jar" shall be searched and loaded from. This allows storing the java applet file "IMasterSaia_x.jar" on a Web-Serv
Nach dem Ablegen von Dateien aus dem Web- Projekt sieht man nach einem Neustart der PCD nicht mehr den 1 MB Flash- Speicher des PCD7.R561 im FTP- Client
In case user program is restored from flash with a PCD3 or PCD2.M5540 with firmware 1.16.xx it is possible (depending on the device configuration) that the restored user program is not complete.
