When using CSF instructions in a PG5 1.4.110 project, it can occur that a build fails due to the error "Too many FB parameters (max is 255)".
Recent versions of Windows OS do not allow the access to COM-ports in the way which is used for DOS. Use an operating system which is based on DOS (DOS, WIN 3.11, Windows 95 or Windows 98) instead.
If you have to analyze an Ethernet Network, you have to connect the monitoring PC between the communicating devices. The easiest way to realize that is with a hub (which are no more available) or with
The supplier of the power supply has changed the color of the LED installed in the power supply from red (old) to green (newer devices). This change was done to have a better identification of the
No, no longer. PCA controllers were repaired until december 2004. Existing applications can be moved to PCD controllers, this FAQ lists companies with very good PCA and PCD knowledge that offer that s
In case your PC does not answer to a ICMP ping, it is very likely that your Windows Firewall is blocking the communication. In case you don't have "admin" rights to disable it, this FAQ might be usefu
With firmware version 024 the modem was not always correctly reinitialised
If the file- or directory- names are not correct, this will lead to errors.
After an emergency stop the power of the driver must be switched off! You also have to stop the motion from the axis module H31x. This FAQ entry points out two ways to do that.
