The first serie of PCD2.T814 modems with baseprint firmware < V1.09 have a problem when using the modem in the Hardware Settings for programming, for sending SMS and for DTMF at the same time.
At the moment it is not possible to connect to several PCD's at the same time using the S-Bus USB channel.
Principally, there's no limitations set by the driver itself ...
Priority 6 is reserved for time operations for BACnet objects like minimum on time or minimum off time.
Our USB driver cannot be installed, if is F-Secure Antivirus installed on your PC The same behaviour occurs also if the Comodo Firewall is installed on the PC The same behaviour occurs as well if th
Yes, it is implemented in the PCD3 with FW Version $12 or later. On the PCD2.M5xx0 it is supported with every firmware
On a Profi S-Bus network when PCD7.D76_ terminals are connected to PCD3.Mxxx or PCD2.M480 PLC's over Profi S-Bus, the terminal loses the communication after some time and get even frozen. This problem
The use of the HMI in bus protocol mode (RS485, "FTP" mode) on all PCD3 RS 485 ports (also on ports F2xx) must TEMPORARY be done with a special setting in the Advanced section of the SW Settings of t
If a project with HMI-Trend Objects was created in an older version of PG5 (
Due to a problem of the firmware version 039 the serial PGU connection on the PGU port does not work.
