Changing the Profi S-Bus settings puts the CPU in HALT with a BUS Error
Per example: Some input LED's are on even if the signal is low on the input.
The following error appears when attempting to open the web builder in a windows XP 32bits System. "No license found on this computer, will run in DEMO mode." after the installation of PG5.2.0
In case alarming-texts are defined in a IL (*.src) or a Fupla file it is possible to display these alarming-texts on a VGA Panel, but specific char (as umlauts, swedish chars and others) do not appear
In case the Ethernet RIO stays in a state where it waits for its first configuration and the status LED remains red. IN this situatino the configuration webpage works, but the status LED stays red. A
After having imported an FBox from a Fupla page all adjust parameters of all the FBoxes on the imported Fupla page are visible in the adjust window. If some of them must not be modified by the end use
After a succesful download the PCD3 or the PCD2.M5xx0 doesn't go in run. It stays in HALT in XOB 16.
The web page is properly displayed but instead of the variable value the text "No component selected" appears.
The reason for the warning is not clear. If a doubleclick on the warning is done it jumps on the first fupla page without indicating where the problem comes from
