The settings for Clock period High and Clock period low must be 2 / 150 same settings as for the PCD2.M480.
No, "DPV1" is not supported! It is absolutely necessary to chose the "S7-compatible" mode.
It is possible capturing the traffic on a Ethernet network and stop this capture based on a specific condition, like e.g. the lack of Ether-S-Bus telegrams from a specific station for a certain time.
For going online with PG5 using PGU mode a special cable (PCD8.K111) is needed. What is the difference between a normal crossed cable and the PCD8.K111)?
The error message: cgi order values failed appers and "No Message" is displayed instead of the PPO value.
In the history of the PCD, different memory lost code can be displayed. The number beside the memory lost message does give a more precise description why the memory was cleared. See the table below
In PG5 1.x it was possible or even necessary that the user modifies the memory allocation manually (for the distribution of the available memory for user program, Text/DB memory and extension memory).
The MB panel can't access the web page stored on the PCD: 'start.htm not found' or similar is displayed but the browser on the PC can display the web page. A warning message on the PC browser is d
In general the firmware versions of the PCD and the BACnet firmware must match (be compatible).
The action "Set Var on Mouse DOWN / UP" does not work correctly when you display a web project on a eXP (PCD7.D6..) panel.
