Yes, the fan speed can be forced over the application program.
Yes it’s possible to modify the TCP/IP settings like “IP Address”, “Subnet Mask” or “Default Router” of the PCD trough the application program. The change of the TCP/IP settings can be performed dur
In order to prevent that someone do copy the web pages which are stored on the file system (memory module) of the PCD, it’s possible to convert the content of the web-pages in a DB of the PCD with the
Yes it’s possible to use the Y1/Y2 triac output as 2 point outputs (always off / always on) instead as PWM outputs.
No, the PCD7.D413 cable has the signal Rx/Tx and RTS/CTS crossed (in relation to the PCD7.D4 panel). The RS232 Port of the PCD7.D4 panel needs the signals: Rx, Tx, GND, RTS, and CTS.
Yes, it’s possible to use the interrupt inputs of the xx7 CPU’s as normal inputs.
No, one master can only handle PCD3.T665/T666 or PCD3.T660 Rio's. It's not possible to mix PCD3.T665/T666 and PCD3.T660 on the same master PCD. The PCD3.T660 is no more available. If existing PCD
Yes, it's possible. During the import of the *.GSD or *.GSE file to the Profibus-DP configurator you can select in which groupe you want to store the new file. You can select the existing groups or
Yes it’s possible to connect a PCD directly to the internet, but you have to protect your PCD against unauthorised access or cyber-attacks.
No, do not connect the RJ45 connector of a Ethernet Port of a PCD directly to Power over Ethernet (PoE). The RJ45 Ethernet port of the PCD will be destroyed if connected directly to PoE (Mode B) beca
