It is possible to configure the onboard inputs and outputs of the PCD3.M2xxx with the "device configurator". A download of this configuration is not stored.
The information provided in the history or the "Diagnostic file" of the PCD does not always give enough information for the firmware developpers to find the reason for e.g. a crash of a PCD. If more i
If you need to update the .jar files on the Niagara supervisor software, perform the following steps:
With firmware version 1.14.23 of the PCD3.Mxxx0 and the PCD2.M5xx0 the amount of available flags has been increased from 8191 to 14335.
The Ether-S-Bus plugin allows filtering the captured telegrams based on one or several properties of the telegram such as the command code contained in the telegram and/or the value of a transmitted m
In case an FBox library (or an IL program) uses a functionality which is not implemented in the PCD firmware, the PCD will not go in run but display the error message "SF not loaded" (e.g. in the PCD
In some cases it might be interesting to know the image version installed on a Windos CE Panel (PCD7.D5xxx). This information can be found in various ways, e.g. by viewing the content of the folder "/
In some cases it might be interesting to know the image version installed on a Windos XP Panel (PCD7.D6xxx). This information can be found in the folder "Version" located in C:\Version on the panel it
Sometimes Network administrators ask for the MAC address of PCD devices with Ethernet connections for setting up their network devices. There is a sticker at the backside of the PCD that indicates t
