Using the SBC CAN Configurator only a Data Mapping for CAN Bus can be created, in this type of configuration the diagnostics and the parametrisation is very limited.
PG5 2.1.310 shows wrongly the path of PG5 2.0 Update Manager. This happens when PG5 2.0 was installed after PG5 2.1!
If an EPROM of a programm with IP-address is made with PG5 1.3.120 the IP-adresse will not be stored in the EPROM (Hex-File)
In the Device Configurator there is a parameter "Extension memory backup size". Using this parameter the size of the memory for backing-up DBs in runtime (in IL) was configured for firmware versions b
The maximal lenght of all file names in a Webproject is 18 characters (without extention). Special characters and spacees are not supported.
In the manual for the file system it is recommended to compress a flash file system after a file has been deleted. This FAQ explains the differences between SD flash systems such as the PCD3.R600 equi
A file was uploaded and disassembled. Nothing has changed in the program code but compiling is not possible.
In case I/O addresses higher than 1024 are accessed with a PCD running firmware 1.14.23, the PCD will not go in run an loose its USB communication.
In case of high environment temperatures together with a configuration of very low frequencies, the PCD2.H210 or the PCD3.H210 could generate an incorrect amount of output pulses.
