In some cases (e.g. in a Web Editor project for a QVGA MB Panel) the widths of the columns of the alarming macro are not convenient. In this case it's possible to adapt the columns width of the alarmi
It is possible to change the configuration of the FTP server by placing a file FTPConfig.txt on the CPU.
It's a well know fact that you can easily access the Web Server of a SBC CE Web Panel PCD7.D5xxx with the default user "admin". In case this user has to be changed for security reasons, read this FAQ.
There are a lot of different Belimo actuators and it isn't always easy to find the correct FBox which does fit to the Belimo device. Especially for the new Belimo devices, not yet present in our doc
To write/clear the counter value in the H104S/SE, the F-Box "H104S/SE Set" must be used.
It's possible to open or close a connection of S-Web-Connect (WebConnect 2.x) to a PCD with the use of a URL address:
One difference between PG5 2.0 and PG5 1.4 is that the "Adjust Parameter Window" of the FBoxes known from PG5 1.4 is no longer displayed by default.
With PG5 2.0 SP1 (PG5 2.0.150) it is possible to configure the S-Web Server, the FTP Server as well as the IP Enhancements (DHCP, DNS, SNTP and PPP) directly in the Device Configurator. It is no longe
The PCD must be equipped with a PCD7.F8xx module and RAM is to be mounted on the memory socket, with the "memory use" set to RAM (the binding does not work with a Flash).
The PCD3.B100 is a special module since there are input and output flags to be mapped onto the same module placed on a PCD3.T760. Because the S-Net SBC Network Configurator does always assign arrays o
