The PCD7.F121 is the successor of the PCD7.F120. The main difference are higher baud rates supported by the PCD7.F121 (up to 115 kBit/s).
In one RS485 network it is possible to use 100 PCD7.H104S without using repeaters.
If you want to use the bluewin.ch SMTP Server for relaying purposes (send an E-Mail from the PCD to the bluewin.ch SMTP Server and the SMTP Server will send the E-Mail to the destination E-Mail accoun
With firmware 1.08.21 of the PCD2.M480 the gateway could get blocked in some specific cases.
There are firmware depending differences in the handling of the Serial-S-Bus communication diagnosic flags TDIA and RDIA. Those flags are refreshed continuously by older FW versions but not by the Sai
The PCD must be equipped with a PCD7.F8xx module and RAM is to be mounted on the memory socket, with the "memory use" set to RAM (the binding does not work with a Flash).
In some cases FBoxes have to provide "Application Symbols" (A-symbol, such as A.HVC.FBoxName.Error). These symbols will be available (but not modifiable) in the "System" tab of the Symbol Editor. This
In some cases, you may need to access the files stored on the filesystem of a PCD where the PCD doesn't have a Ethernet connection. It is possible to get this access via an USB cable and software SB
For security reasons it’s not possible to change (or adapt) the destination IP-Address on the download window of the 'Download over HTTP/FTP' downloader like it would be possible on other PG5 download
This FAQ describes the architecture of Windows CE based Web Panels (PCD7.D5xxx).
