When an alarm arises and the display (e.g. a PCD7.D23x) is connected on an RS 485 bus, the screen of the terminal can't be forced in order to display the alarm contained in the buffer.
This functionality is only available on the PCD7.F655 with firmware version 041 or newer. Further on this functionality does only allow the PCD to receive a dynamic IP address but it does not help oth
On the PCD3.M5340 the bus termination can be activated in the PG5 Hardware Settings. A relay is switching the termination on or off.
It is possible setting the clock of the terminals by passing a command from the PCD to the command area of the terminal. There is an FBox library that was built for this task and eases the handling o
In some cases, it is necessary to replace the micro-SD memory card (uSD) of the PCD. This FAQ describes how to replace the micro-SD memory card (uSD) which is mounted on the PCD controller's PCB
On a CE Web panel, it could be usefull to start an application, in order to generate a sound for example.
In some cases FBoxes have to provide "Application Symbols" (A-symbol, such as A.HVC.FBoxName.Error). These symbols will be available (but not modifiable) in the "System" tab of the Symbol Editor. This
With firmware 1.16.27 it is possible to write the user program backup to the file system. This new backup does also include the media (register, flags, timer, counter) as well as the configuration of
