Problem: In the case of Ethernet network interruption, a diagnostic flag 'S.RIO.NameXY.Diagnostic' is set in the Ethernet Smart-RIO manager, which indicates that communication to the Ethernet Smar
On the programmable Smart Ethernet RIO PCD3.T66x there is a diagnostic flag available which can be used to detect whether the RIO Manager CPU is exchanging data with the RIO. However, when using PG5
The compiler sets automatically the correct constant type if it don't match to the instruction.
To communicate with a Siemens Slave it is necessary to place the modules Kennung generell 1-3.
If the PCD7.D23x display is programed with IL code the character 'ü' is displayed as 'n' on the PCD7.D23x display!
In case I/O addresses higher than 1024 are accessed with a PCD running firmware 1.14.23, the PCD will not go in run an loose its USB communication.
In the manual of the PCD2.H110 you can find an example of automatic period measurement where the XOB 20 is used for reading the measurement continuously. This example doesn't work on a PCD2.M480 due t
On some older hardware versions the SD card is only recognized at power on of the PCD but not in run time of the PCD.
This is usually the case if you are not connected in full protocol.
When using a PCD7.F772 or PCD7.F802 on a PCD2.M1x7 with FW Version 3.110 only the RS 485 communication works. Otherwise the Profibus / LON communication did not work.
