A user programme containing Profibus FMS configuration doesn't work on CPU0! It has to be downloaded on CPU 1 because this CPU bord contains the RS 485 Profibus FMS port!
In some cases it can happen that the PCD3.F180 (produced between 2006 and Febrauary 2007) works well for a certain time but suddenly stops communicating. This behaviour is related to the hardware vers
The Flag "Ondest_x" indicates that the position of the integrator has been reached (theoretical position). It does not mean the actual position is reached. Ondest_x --> Theoretical position - positi
The analogue entries of the PCD3.W745 card aren't displayed correctly when using the memory mapping of the PG5 2.0 SP2 Device Configurator. On the other hand everything is running fine when I use the
Yes it’s possible to use the Y1/Y2 triac output as 2 point outputs (always off / always on) instead as PWM outputs.
No, even if you choose the file extention .csv it does not mean, that the file has comma separated format readable from excel.
Thanks to the analysis of returned modules we have found that several PCD7.L79x devices were damaged due to inconsistent polarity of the connected AC power supply. This can be the case if no attention
No. This is a PG5 restriction. The ethernet configuration can only be loaded to CPU 0. It is not possible to configure the PCD6.M3 with ethernet-module as an other CPU than CPU 0.
For example you want to access the Webserver in the Internet Explorer with address: 172.16.1.91/start.htm and an error appears by loading the java applet: NullPointerException! This is caused because
