Yes, this is possible. But since after the binding of a LON-structure and restarting the PCD some data are written into a DBX you have to use a RAM as extension for this procedure first!
Due to some problems of timing with the processor Dual Core from AMD the scommdll don't work properly. Some errors messages occur during the download and the download fails.
The custom standby menu of the HMI Editore features an entry called "Variable" and "Variable ASCII". These variables allow showing values and short texts (4 characters) defined by the user on the root
Per example: Some input LED's are on even if the signal is low on the input.
In contrast to the conventional analogue modules (e.g. the W600), the DAC (Digital to Analogue Convertor) of the PCD2/3.W6x5 is not accessed directly over the internal I/O bus of the PCD. The command
When building a project with HDLog FBoxes the build fails with the message "Down.wsc Line xxxx Symbol not defined_stc_id_0016_var_00" or similar can be caused by an incorrect setting in the Fupla opti
In case you are using the modem G736-AS2 with Version V3.01.C3 or newer without SIM card inserted there will be the error 8 'No Modem' in the Fbox 'Modem Driver 18'.
This FAQ tells you how to correctly define the remote IP-Address as PCD text-medium when receiving telegrams in IP Open Data with the CSF "ReceiveData"/"ReceiveDataRev".
The PCD7.L600, L601 and L603 room controls units delivered since April 2009 are equipped with a different connection terminal in comparison with the units which are delivered before April 2009. The n
With the use of the PCD7.L645W/B, the maximum power consumption on the RJ9 jack had to be increased. That's the reason why you have to respect new minimum hardware versions of PCD7.L60x and L61x when
