In case more than one PCD2.R6000 produced before August 2009 are installed on a PCD2.M5xxx, the PCD does not properly initialize the file systems during start up. As result the file systems can not be
It is possible to connect a PCD over a server. This means that the PCD is connected to a remote PC (server). PG5 on the local PC will connect the SCommDrv on the remote PC and therefore reads the med
Due to an error in the HMI Editor 1.4 this error can appear when using HMI Editor
The values of persistent containers are stored permanently on the file system. If you close MicroBrowser the values of the persistent containers are not lost.
When using PCD1 with a flash additionnal memory, after program download the CPU goes in halt, with the error: checksum fail if the CPU name starts with a number and/or contains an accent (eg: 1er étag
After a PG5 Update to the version PG5 2.1.210, the Ether S-Bus Communication is no more working. The S-Bus client and server functionality is disabled in the Device Configurator.
When calling an FB, the parameters should be given as an Array of flags. On compining there is an error message: "missing fb parameters displayed".
In Tag Objet of the HMI Editor the butons are displayed on 2 lines and the the first 4 Element lines are hidden (see picture below). So it isn't possible to configure the object element properly!
According to the help the format of the clock holiday is MM:DD (Month day). Otherwise it is not possible to enter p.e 12.30
