An external device like scada or supervision sytem can know the status of the PCD (Run, Halt, Stop or Conditioanl Run) by using a special item of the S-Bus OPC-Server or by using a special S-Bus teleg
Before you can use the SYSWR K 3100 and K 3101 calls, the onboard Flash first has to be partitioned.
When choosing the dynamic registers above 8191 on a PCD2.M5xx0, a PCD2.M480 or a PCD3, this error message can appear in case FBoxes are used which apply "indirect instructions".
The PCD3.M3xxx, PCD3.M5xxx and PCD3.M6xxx do feature different possibilities for using the port 10 (D-Sub connector) and port 2 (terminal block).
If you want to use the S-Bus OPC-Server and PG5 on the same PC then you have to make attention to use the correct version of the S-Bus OPC-Server which fit with the corresponding version of the scommd
Attached to this FAQ you will find a document that describes the symbol naming conventions to be obeyed by PG5 users (and especially by FBox developers). Further on, the document contains a summary o
The resources (registers, flags, timers, counters etc) and possibly the user program and the text strings/DBs on a PCD3.M3xx0 are stored in RAM. To ensure that they are not lost and that the hardware
Instead of the maximal value it is just possible to set the minimal value twice.
If all alarms are acknowleged the General Acknowleg Flag should disappear. It can happen, that a flag is still high and therefore it doesn't disappear.
The article 450748150 is no longer available from Saia-Burgess Controls AG as the according displays have been phased-out. However, this article can be bought from other providers (it is a Lithium bat
