In case the PG5 2.0 FBox library version 2.6.150/151 (or PG5 1.4 version 2.5.100/101) is used the change from "autonomous" to "slave" mode does not work correctly. This problem is corrected in the PG5
To keep some important values in case of a program restore it is possible to store DBs to the onboard flash using the instructions SYSWR K 310x. When using an additionally memory card (R551, R600), th
If the HMI Editor project uses multipoint topologie with RTS-CTS and a display isn't connected, a wrong indexing in the HMI library may overwrite internal registers so that in some case the error LED
In some special cases an adaption of the initialization strings used by modem FBox library are required. This FAQ explains the necessary steps for such an adaption.
This functionality is only available on the PCD7.F655 with firmware version 041 or newer. Further on this functionality does only allow the PCD to receive a dynamic IP address but it does not help oth
If the CE panel is rebooted the configured stations in SWebConnect get lost.
There is a problem on PG5 2.0 concerning the W745 module and Media mapping on PCD1M2120. The error message: Error 2021: _Device2.obj: Unresolved external symbol: S.IO.Slot0.StatusAnalogueInput a
The "Alarming 2" feature comes along with some new functionalities as for example alarms in groups and priorities. But, this groups and priorities are not correctly displayed using the Alarming v2.6.1
For some reason the installation of the PG5 key file fails. The error message Failed to copy key file appears
