Main features - Single-phase energy meter, 230 VAC 50 Hz - Direct measurement up to 32 A - Display of active power, voltage and current - M-Bus Interface to query the data - Reactive power available through interface - Up to 250 meter can be connected to the M-Bus Interface - 7-digit display - Lead seal possible with cap as accessory - Accuracy class B according to EN50470-3, accuracy class 1 according to IEC62053-21
Main Features: - 3-phase energy meter, 3 × 230/400 VAC 50 Hz - Measurement through a current transformer up to 1500 A - Display of energy, instantaneous power, voltage and current - Display of the total active power - M-Bus interface to retrieve the data - Reactive power per phase or total, available via M-Bus interface - Up to 250 meters can be addressed trough primary addresses - 7-character display - Can be sealed with sealing cap (optional) - Accuracy class B according to EN50470-3, accuracy class 1 according to IEC62053-21
Main Features: - 3-phase energy meter, 3 × 230/400 VAC 50 Hz - Direct measuring up to 65 A - Display of energy, power, voltage and current - Display of the total active power - M-Bus interface to retrieve the data - Reactive power per phase or total, available via M-Bus interface - Up to 250 meters can be addressed trough primary addresses - 7-character display - Can be sealed with sealing cap (optional) - Accuracy class B according to EN50470-3, Accuracy class 1 according to IEC62053-21
Latest Generation Energy Meters E-Mon BLACK - direct measurement
Some M-Bus devices (so far only observed on a MBus water counter from the company Allmess / Actris) are very sensitive against inter-character delays.
When reading values from some specific M-Bus devices with the M-Bus modules PCD2/3.F27xx, the M-Bus driver may show the error "Missing value" even though all values are correctly returned by the device.
In the M-Bus library for the SBC Energy Meters (which can be installed for PG5 1.4, PG5 2.0 and PG5 2.1) the following modifications have been applied.