protocol for PCD2/3.F2xx(x) e.g. used by the M-Bus library 2.6.100 and later The single function codes (second line of the CSF call, "0" in the screenshot above) of the relevant libraries can be found [...] version PCD1.M1x5 0F0 PCD2.M150 0F0 PCD2.M170 0F0 PCD2.M480 1.08.21 PCD2.M5xx0 1.08.19 PCD3.Mxxx0 1 [...] 2.M150 A29040B-70F (AMIC) 4 502 7341 0 old: ST39SF040-70 (SST) old: AT49F040-70 (ATMEL) FW chip for PCD2.M127/157 (needs FW V3
protocol for PCD2/3.F2xx(x) e.g. used by the M-Bus library 2.6.100 and later The single function codes (second line of the CSF call, "0" in the screenshot above) of the relevant libraries can be found [...] /s. In addition an UART of an PCD7.F5xx isn't able to handle 19.2 kB/s on one and 38.4 kB/s on the other port. But it is possible to assign both ports to 38.4 kB/s. Systems introduced since 2003 (PCD2.M480 and PCD3.xxxx): Due to faster hardware there are much higher baud rates possible on the serial ports (up to 115 kB/s)! There is only one restriction regarding UART sharing left: On a PCD7.F5
trace back a crash, a dump of the whole memory (SRAM, DRAM and FLASH) of a PCD can be done. This FAQ does apply to PCD1.M2, PCD2.M480, PCD2.M5xxx, PCD3 (including PCD3.Mxx60) and PCD7.D4xxxT5F [...] Tool.exe in the PG5 directory. PCD1.M2 PCD2.M480 PCD2.M5 PCD3 PCD3.Mxx60 (fast CPU) PCD7.D4xxxT5F (programmable MB-panels) Usage of the old stand alone tool SaiaDump.exe: This tool [...] .1.210 there is a dumptool.exe available in the PG5 installation directory which can be used instead of the SaiaDump.exe March 2013 (version 1.3.006) - Support also the PCD7.D4xxxT5F (programmable
protocol for PCD2/3.F2xx(x) e.g. used by the M-Bus library 2.6.100 and later SF library 23: Energy Manager library SF library 25: LON FT library SF library 27: ELine library for ELine modules [...] media (Flags, Registers, Timers/Counters) remains unchanged. However: Updating to FW 1.20.xx or higher from a version 1.16.xx deletes the data on SRAM. PCD2.M5xx0 & PCD3 [...] 1.M0xx0/M2xx0, PCD2.M4x60, PCD3.Mxx60, PCD3.M6880 and PCD3.T665/T666/T668 The table below does show the hardware dependencies in relation with the COSinus firmware versions Do use at least the PG5
protocol for PCD2/3.F2xx(x) e.g. used by the M-Bus library 2.6.100 and later SF library 23: Energy Manager library SF library 25: LON FT library SF library 27: ELine library for ELine modules [...] media (Flags, Registers, Timers/Counters) remains unchanged. However: Updating to FW 1.20.xx or higher from a version 1.16.xx deletes the data on SRAM. PCD2.M5xx0 & PCD3 [...] 1.M0xx0/M2xx0, PCD2.M4x60, PCD3.Mxx60, PCD3.M6880 and PCD3.T665/T666/T668 The table below does show the hardware dependencies in relation with the COSinus firmware versions Do use at least the PG5
temperature values on W745 Module if used without F-Box Not possible to read values from specific M-Bus devices (FAQ 101762) Restore from Flash (PCD3/7.R500) does not work if performed in PG5 (FAQ 101779 [...] corrections on Modbus Firmware 1.16.52 (November 2011) New features Support of the M-Bus modules PCD2.F27x0 and PCD3.F27x Support of firmware download to F2xx modules Main [...] suddenly it's no longer possible to transmit SMS messages from a PCD3 WAC (PCD3.M2230A4T5 or PCD3.M2330A4T5). This problem only occurs on PCD3 WAC with GSM modem and with HW version smaller than B and
temperature values on W745 Module if used without F-Box Not possible to read values from specific M-Bus devices (FAQ 101762) Restore from Flash (PCD3/7.R500) does not work if performed in PG5 (FAQ 101779 [...] corrections on Modbus Firmware 1.16.52 (November 2011) New features Support of the M-Bus modules PCD2.F27x0 and PCD3.F27x Support of firmware download to F2xx modules Main [...] suddenly it's no longer possible to transmit SMS messages from a PCD3 WAC (PCD3.M2230A4T5 or PCD3.M2330A4T5). This problem only occurs on PCD3 WAC with GSM modem and with HW version smaller than B and
specific M-Bus devices with the M-Bus modules PCD2/3.F27xx, the M-Bus driver may show the error "Missing value" even though all values are correctly returned by the device. Symptom When using the M-Bus modules PCD2/3.F27xx (with the framing protocol), the M-Bus driver may display the error "Missing value" even though all values are correctly returned. The problem concerns only few devices [...] Incompatibility of PCD2 /PCD3.F27x(0) and "Hydrometer M-Bus Receiver 868" (FAQ #101717) The M-Bus communication between the
temperature values on W745 Module if used without F-Box Not possible to read values from specific M-Bus devices (FAQ 101762) Restore from Flash (PCD3/7.R500) does not work if performed in PG5 (FAQ 101779 [...] corrections on Modbus Firmware 1.16.52 (November 2011) New features Support of the M-Bus modules PCD2.F27x0 and PCD3.F27x Support of firmware download to F2xx modules Main [...] suddenly it's no longer possible to transmit SMS messages from a PCD3 WAC (PCD3.M2230A4T5 or PCD3.M2330A4T5). This problem only occurs on PCD3 WAC with GSM modem and with HW version smaller than B and
temperature values on W745 Module if used without F-Box Not possible to read values from specific M-Bus devices (FAQ 101762) Restore from Flash (PCD3/7.R500) does not work if performed in PG5 (FAQ 101779 [...] corrections on Modbus Firmware 1.16.52 (November 2011) New features Support of the M-Bus modules PCD2.F27x0 and PCD3.F27x Support of firmware download to F2xx modules Main [...] suddenly it's no longer possible to transmit SMS messages from a PCD3 WAC (PCD3.M2230A4T5 or PCD3.M2330A4T5). This problem only occurs on PCD3 WAC with GSM modem and with HW version smaller than B and
