supporting the "Secure S-Bus Data mode"). Saia PCD® COSinus based systems (PCD2.M480, PCD2.M5xx0 and PCD3) are not concerned. Reason The reason for this behavior is that the PCD/PCS does not correcly [...] ! How long does it take to load the supercap? (FAQ #100707) The PCD1.M110, PCS1 and PCD3 are equipped with a supercap [...] Saia PCD® COSinus systems (PCD3, PCD2.M5 and PCD2.M480) this problem doesn't occur
supporting the "Secure S-Bus Data mode"). Saia PCD® COSinus based systems (PCD2.M480, PCD2.M5xx0 and PCD3) are not concerned. Reason The reason for this behavior is that the PCD/PCS does not correcly [...] ! How long does it take to load the supercap? (FAQ #100707) The PCD1.M110, PCS1 and PCD3 are equipped with a supercap [...] Saia PCD® COSinus systems (PCD3, PCD2.M5 and PCD2.M480) this problem doesn't occur
. PCD3.M5360: Power CPU with 2MByte program memory, 128MByte intflash, USB, Ethernet, RS-232, 4 IO slots, expandable up to 64 IO modules. Fupla: Status indicators of unconnected FBox [...] .ch. On a PCD3.M6860 it’s possible to use BACnet on the Ethernet port ETH1 and/or on ETH2? (FAQ #102031) Yes it’s possible to use BACnet on both ports ETH1 or ETH2 of the PCD3.M6860. In PG5 it’s possible to activate at the same time BACnet on ETH1 and ETH2 but we strongly recommend to use/activate BACnet only on
. PCD3.M5360: Power CPU with 2MByte program memory, 128MByte intflash, USB, Ethernet, RS-232, 4 IO slots, expandable up to 64 IO modules. Fupla: Status indicators of unconnected FBox [...] .ch. On a PCD3.M6860 it’s possible to use BACnet on the Ethernet port ETH1 and/or on ETH2? (FAQ #102031) Yes it’s possible to use BACnet on both ports ETH1 or ETH2 of the PCD3.M6860. In PG5 it’s possible to activate at the same time BACnet on ETH1 and ETH2 but we strongly recommend to use/activate BACnet only on
. PCD3.M5360: Power CPU with 2MByte program memory, 128MByte intflash, USB, Ethernet, RS-232, 4 IO slots, expandable up to 64 IO modules. Fupla: Status indicators of unconnected FBox [...] .ch. On a PCD3.M6860 it’s possible to use BACnet on the Ethernet port ETH1 and/or on ETH2? (FAQ #102031) Yes it’s possible to use BACnet on both ports ETH1 or ETH2 of the PCD3.M6860. In PG5 it’s possible to activate at the same time BACnet on ETH1 and ETH2 but we strongly recommend to use/activate BACnet only on
. PCD.Smart.M1xx Credit card CPU's for OEM applications Documentation Firmware Good to know The firmware version 3.123 is to be used for systems procuded after January 2010, because a new flash chip is used in this hardware. This new flash chip is not supported by firmware versions before 3.123. [...] Product Category Archive OEM Products PCD.Smart General
3360: Power CPU with 512kByte program memory, 128MByte intflash, USB, Ethernet, 4 IO slots, expandable up to 64 IO modules. PCD3.M5360: Power CPU with 2MByte program memory, 128MByte intflash, USB, Ethernet [...] : PG5-4526: For PCD3.M6880 it’s now possible to select correctly the FW PG5-4538: PCD1.G3600, Analog inputs 0..300kOhm, max. possible value is now 300'000 For old firmware in PCD3.M5x40 PCDs, the Build Option "Extended COB, PB and FB Numbering" option is not forced to 'Yes' PG5-4563: 'Upload All' now works for PCD3.M5340 S-Web Editor 8: WEBED-1681: Tool tacho, option clockwise
3360: Power CPU with 512kByte program memory, 128MByte intflash, USB, Ethernet, 4 IO slots, expandable up to 64 IO modules. PCD3.M5360: Power CPU with 2MByte program memory, 128MByte intflash, USB, Ethernet [...] : PG5-4526: For PCD3.M6880 it’s now possible to select correctly the FW PG5-4538: PCD1.G3600, Analog inputs 0..300kOhm, max. possible value is now 300'000 For old firmware in PCD3.M5x40 PCDs, the Build Option "Extended COB, PB and FB Numbering" option is not forced to 'Yes' PG5-4563: 'Upload All' now works for PCD3.M5340 S-Web Editor 8: WEBED-1681: Tool tacho, option clockwise
3360: Power CPU with 512kByte program memory, 128MByte intflash, USB, Ethernet, 4 IO slots, expandable up to 64 IO modules. PCD3.M5360: Power CPU with 2MByte program memory, 128MByte intflash, USB, Ethernet [...] : PG5-4526: For PCD3.M6880 it’s now possible to select correctly the FW PG5-4538: PCD1.G3600, Analog inputs 0..300kOhm, max. possible value is now 300'000 For old firmware in PCD3.M5x40 PCDs, the Build Option "Extended COB, PB and FB Numbering" option is not forced to 'Yes' PG5-4563: 'Upload All' now works for PCD3.M5340 S-Web Editor 8: WEBED-1681: Tool tacho, option clockwise
. PCD3 / Wxxx On a PCD2.M4560 or PCD3.M5560, why [...] measured PT100 temperature values of the 8 channels are not correct. ‘Power PCD’s’ are: PCD1.M2x20, PCD1.M2160, PCD1.M2220-C15 PCD2.M5540, PCD2.M5440, PCD2.M4160, PCD2.M4560 PCD3.Mxx60 To solve the issue, use and connect only up to 7 PT100 sensors to the PCD2/3.W220Z18 or do use a PCD2/3.W350 module, if all 8 PT100 are needed. On the ‘old’ PCD’s like PCD2.M170 or PCD3.M5540 the
