work on port 2 on PCD3.M3x60 & PCD3.M5360. PCD3.M6860: Ping request from over rooter from different sub net is not respond. PCD3.M6860/M880: Profibus/S-IO/Profi-SBus does not work stable. PCD3.M [...] 2220-C15 Support of PCD2.M4x60 Support of PCD3.M3160/PCD3.M3360/PCD3.M5360 Support of PCD3.M6880, PCD3.T668 Standby-CPU-System Improvements PCD2.M4x6x, support Interrupt when reaching the [...] COSinus FW 1.28.37 was released as maintenance version for the systems: - PCD1.M0xx0/M2xx0, PCD2.M4x60, PCD3.Mxx60, PCD3.M6880 and PCD3.T665/T666/T668 . In June 2017: the COSinus FW 1
configuration, the Ethernet and DHCP parameters organization has been re-organized. The following device and modules are now integrated into the Device Configurator: PCD3.T665/6, PCD1.M2020, PCD2.C1000, PCD2/3.B160, PCD2.F27x0 and PCD3.F27x and the PCD3/7.R580 and PCD3/7.R581. The Label Editor, included in the Device Configurator, has been updated in order to define and print labels for the PCD1.M2xx0 devices [...] new flash backup/restore to file system function which also includes the media (Register, Flags, Timer, Counters) described in FAQ 101622 (for PCD2.M5 and PCD3) and FAQ 101632 (for PCD1.M2). The
configuration, the Ethernet and DHCP parameters organization has been re-organized. The following device and modules are now integrated into the Device Configurator: PCD3.T665/6, PCD1.M2020, PCD2.C1000, PCD2/3.B160, PCD2.F27x0 and PCD3.F27x and the PCD3/7.R580 and PCD3/7.R581. The Label Editor, included in the Device Configurator, has been updated in order to define and print labels for the PCD1.M2xx0 devices [...] new flash backup/restore to file system function which also includes the media (Register, Flags, Timer, Counters) described in FAQ 101622 (for PCD2.M5 and PCD3) and FAQ 101632 (for PCD1.M2). The
to a bus and simplify the cable work significantly for HeaVAC applications.With PCD2.F2810 (for PCD1.M2xx0 and PCD2.M5) and PCD3.F281 modules (for PCD3 systems) a PCD system can be connected to the MP [...] 2.F2810 Serial interface module with 1x Belimo MP-Bus (max. 8 (16* 1 ) actuators and sensors) and 1 socket for PCD7.F1xx module. To be plugged into I/O slot 0..3 of a PCD1.M2xx0 or a PCD2.M [...] .F221 Workaround to use the RS-232 S-Bus communication over converters: For the PCD3: Instead of using a PCD3.F221, use the PCD3.F121. For PCD1.M2 or PCD2.M5: Instead of using a PCD2.F2xx0, use the PCD
to a bus and simplify the cable work significantly for HeaVAC applications.With PCD2.F2810 (for PCD1.M2xx0 and PCD2.M5) and PCD3.F281 modules (for PCD3 systems) a PCD system can be connected to the MP [...] 2.F2810 Serial interface module with 1x Belimo MP-Bus (max. 8 (16* 1 ) actuators and sensors) and 1 socket for PCD7.F1xx module. To be plugged into I/O slot 0..3 of a PCD1.M2xx0 or a PCD2.M [...] .F221 Workaround to use the RS-232 S-Bus communication over converters: For the PCD3: Instead of using a PCD3.F221, use the PCD3.F121. For PCD1.M2 or PCD2.M5: Instead of using a PCD2.F2xx0, use the PCD
to a bus and simplify the cable work significantly for HeaVAC applications.With PCD2.F2810 (for PCD1.M2xx0 and PCD2.M5) and PCD3.F281 modules (for PCD3 systems) a PCD system can be connected to the MP [...] 2.F2810 Serial interface module with 1x Belimo MP-Bus (max. 8 (16* 1 ) actuators and sensors) and 1 socket for PCD7.F1xx module. To be plugged into I/O slot 0..3 of a PCD1.M2xx0 or a PCD2.M [...] .F221 Workaround to use the RS-232 S-Bus communication over converters: For the PCD3: Instead of using a PCD3.F221, use the PCD3.F121. For PCD1.M2 or PCD2.M5: Instead of using a PCD2.F2xx0, use the PCD
interrupt inputs (Int0 = i 8100; Int1 = i 8101) of a PCD2.M5xxx or PCD3.Mxxxx as normal input without using the corresponding interrupt XOB. Symptom When using I8100 or I8101 in Fupla they are [...] Ymax - Range Example: the sensor gives 4...20 mA and we want to display a value from 0...500 m3 using a PCD4.W300 card! Range = (500- 0) . 20 mA = 625 [...] .ex. PCD2.W34, PCD2.W3x5, PCD2.W6x5 etc. some of these symbols are used by the F-Box. Other symbols in the project with the same names will cause a conflict. The error message above or similar will appear on
interrupt inputs (Int0 = i 8100; Int1 = i 8101) of a PCD2.M5xxx or PCD3.Mxxxx as normal input without using the corresponding interrupt XOB. Symptom When using I8100 or I8101 in Fupla they are [...] Ymax - Range Example: the sensor gives 4...20 mA and we want to display a value from 0...500 m3 using a PCD4.W300 card! Range = (500- 0) . 20 mA = 625 [...] .ex. PCD2.W34, PCD2.W3x5, PCD2.W6x5 etc. some of these symbols are used by the F-Box. Other symbols in the project with the same names will cause a conflict. The error message above or similar will appear on
interrupt inputs (Int0 = i 8100; Int1 = i 8101) of a PCD2.M5xxx or PCD3.Mxxxx as normal input without using the corresponding interrupt XOB. Symptom When using I8100 or I8101 in Fupla they are [...] Ymax - Range Example: the sensor gives 4...20 mA and we want to display a value from 0...500 m3 using a PCD4.W300 card! Range = (500- 0) . 20 mA = 625 [...] .ex. PCD2.W34, PCD2.W3x5, PCD2.W6x5 etc. some of these symbols are used by the F-Box. Other symbols in the project with the same names will cause a conflict. The error message above or similar will appear on
interrupt inputs (Int0 = i 8100; Int1 = i 8101) of a PCD2.M5xxx or PCD3.Mxxxx as normal input without using the corresponding interrupt XOB. Symptom When using I8100 or I8101 in Fupla they are [...] Ymax - Range Example: the sensor gives 4...20 mA and we want to display a value from 0...500 m3 using a PCD4.W300 card! Range = (500- 0) . 20 mA = 625 [...] .ex. PCD2.W34, PCD2.W3x5, PCD2.W6x5 etc. some of these symbols are used by the F-Box. Other symbols in the project with the same names will cause a conflict. The error message above or similar will appear on
