Your search returned 698 results

451. BIM - Analogue output modules PCD3.W600

     Relevance:

      

     1%

     Input/output modules for Saia PCD3 controllers Analogue output modules Analogue output module, 4 channels, 12 bits, 0…10 V / ±10 V / 0…20 mA (connector type A included)

452. BIM - Accessories for PCD3 - Plug "AB8"

     Relevance:

      

     1%

     Plug-in terminal blocks for the IEC-Controller PCD3.M6893 Plug-in spring terminal block, 8-pole 0.2…2.5 mm2 (black block) "AB8"

453. BIM - Accessories for PCD3 - Plug "10-pin"

     Relevance:

      

     1%

     10 Plug-in terminal blocks for the IEC-Controller PCD3.M6893 X0 – Communicatio interfaces: Slot A Plug-in spring terminal block, 10-pole, 0.14…1.5 mm2 (black block), labelled 0 to 9

454. Is it possible to use the S-Net MPI port as free RS 485 port?

     Relevance:

      

     1%

     Yes, it is possible to use the S-Net MPI port on the PCD3.M5xxx as free RS 485 port (S-Bus or Mode C per example).

455. Why is the message: "Failed to get data on alarm.exe" displayed on the alarming page?

     Relevance:

      

     1%

     This error message appears if the used firmware on the CPU does not support the "active and non ACK" filter for the S-Web alarming functionality (e.g. a PCD2.M150 with firmware 0D3).

456. BIM - PCD3 processor unit

     Relevance:

      

     1%

     CPU base units for 4 plug-in I/O modules - Saia PCD3.M5 series PCD3 processor unit with Ethernet TCP/IP, web and FTP server, file system, CPU with 1 MByte user program, backup option with PCD7.R5xx/R610 Flash card, clock (RTC), data protection 1-3 years, USB port for PG5, up to 1024 I/O, 2 interrupt inputs, RS-232, RS-422/485, RS-485 for Profi-S-Net/S-Bus

457. PCD0 Profibus DP RIO

     Relevance:

      

     1%

     the PCD7.F7500. As result, the module can not be configured and the Error LED of the PCD is lit. The PCD2.M5540 hardware version C with modification 3,5, 6 contains a modification of the CPLD which assures that the module PCD7.F7500 it detected correctly. Solution Please use the PCD7.F7500 module wiith a PCD2.M5540 with the hardware version/modification "C 3,5, 6 ". In case you are concerned [...] Profibus DP interface (or Profi-S-I/O) interface is depending on the system (the amount is not the same for a PCD7.F750 or a PCD3). PCD7.F750 placed on a PCD2.M1x0 (non SBC-NT) The Profibus DP

458. PCD0

     Relevance:

      

     1%

     the PCD7.F7500. As result, the module can not be configured and the Error LED of the PCD is lit. The PCD2.M5540 hardware version C with modification 3,5, 6 contains a modification of the CPLD which assures that the module PCD7.F7500 it detected correctly. Solution Please use the PCD7.F7500 module wiith a PCD2.M5540 with the hardware version/modification "C 3,5, 6 ". In case you are concerned [...] Profibus DP interface (or Profi-S-I/O) interface is depending on the system (the amount is not the same for a PCD7.F750 or a PCD3). PCD7.F750 placed on a PCD2.M1x0 (non SBC-NT) The Profibus DP

459. FW depending differences in the handling of the diagnosic flags

     Relevance:

      

     1%

     There are firmware depending differences in the handling of the Serial-S-Bus communication diagnosic flags TDIA and RDIA. Those flags are refreshed continuously by older FW versions but not by the Saia PCD® COSinus Classic PCD firmware (used for PCD2.M480 and PCD3 controllers).

460. Can I read a value from a PCD text and copy it into a register?

     Relevance:

      

     1%

     For "reading" a value from a PCD text (e.g. copying "1234" from a PCD text with content "The next number is: 1234" into a Register) a new System Function has been added for PCD3 and PCD2.M5xx0.