Your search returned 698 results

41. Which firmware and hardware version is needed for TCP/IP communication?

    Relevance:

     

    2%

    TCP/IP communication is generally possible on the PCD1.M120 and M13x, on PCD2.M150, PCD2/4.M170, PCD2.M480 and on all PCD3 with TCP/IP communication port.

42. Which Profibus address do I have to choose if the PCD3.M5547 is used as Profi S-IO master or the PCD3.M6547 is used as DP Slave and Master?

    Relevance:

     

    1%

    In this case the Profibus DP address has to be the same address as the MPI address. Other Profibus addresses will not be accepted or can lead to problems.

43. What's the max. data amount that can be exchanged between a SBC-NT PLC and a PCD3.T760?

    Relevance:

     

    1%

    Against the description of the exchangeable amount of data in the Profibus DP manual, a SBC-NT PLC (PCD3, PCD1.M2, PCD2.M5xxx, PCD2.M480) can communicate with a PCD3.T760 a maximum amount of 2'048 bytes.

44. What kind of DP profile do I have to choose when using the PCD3.M6547 as Master and Slave?

    Relevance:

     

    1%

    In this case the DP profile: "Universell DP / FMS" has to be chosen. Other protocols won't work due to timing problems.

45. What is the signification of the history entry "Resisters Fail"?

    Relevance:

     

    1%

    Due of a firmware error it's possible that on the history of the PCD3.M5340 there is an entry "Resistors Fail".

46. What is the difference between a PCD3.C200 and a PCD3.C200Z09?

    Relevance:

     

    1%

    The PCD3.C110Z09 and the PCD3.C200Z09 are designed for the direct connection to a PCD3 Compact (PCD3.M2x3xV6) or a PCD3 WAC with a PCD3.K010.

47. What is the difference between PCD2.M177 firmware version 3.123 and previous versions?

    Relevance:

     

    1%

    In february 2010 a new firmware version for the systems PCD2.M177 and PCD.Smart.M177 has been introduced into production. The reason for this introduction is that a new type of flash is used on the PCD7.R400 memory modules. This new flash memory is only supported by the new firmware 3.123 (and later versions).

48. What is the article number of the orange 8-pol cage clamp connector (power supply connector) of the PCD3.M3/5 CPU?

    Relevance:

     

    1%

    The article (order) number is: 4 405 4995 0

49. What is the article number of the PCD3.M5/6 onboard battery module?

    Relevance:

     

    1%

    If you need to order separetly the onboard battery module of the PCD3.M5/6 CPU (which is normally part of the standard delivery of a PCD3.M5 or a PCD3.M6) please use the following article number: 4 639 4898 0

50. What criterias are to be fulfilled for sending e-Mails from the PCD?

    Relevance:

     

    1%

    The PCD3 systems equipped with an Ethernet port and the PCD2.M5540 are able to send emails. But sending e-Mails is not only depending on the CPU itself.