Your search returned 698 results

331. PCD3.F27x and PCD2.F27xx M-Bus is not always short cut protected!

     Relevance:

      

     1%

     Those M-Bus cards have a short-cut protection on the bus but when the CPU isn't anymore power supplied and the F27x(x) card still has 24 V supply there is no short cut protection anymore!

332. Different handling of the TBSY flag (in MC mode) between PCD3 / PCD2.M5 and older systems

     Relevance:

      

     1%

     The diagnostic flag TBSY of the "Character Mode" (used for sending characters over a serial line) is not handled the same way on a PCD3 compared to "older" systems like e.g. PCD2.M170.

333. If the PCD3.Mxx7 or PCD2.M5547 has a Profibus configuration it goes often in Stop after startup

     Relevance:

      

     1%

     The OB 86 has to be programmed

334. How does the "Backup user program to file system" on PCD3 and PCD2.M5 work?

     Relevance:

      

     1%

     With firmware 1.16.27 it is possible to write the user program backup to the file system. This new backup does also include the media (register, flags, timer, counter) as well as the configuration of

335. Why does the S-I/O communication no longer work on a PCD3 or a PCD2.M5?

     Relevance:

      

     1%

     If there is a SIO-Master and a DP-Master configured the SIO-Master does not go in the "Operate" state to make the data exchange.

336. Why are broadcast telegramms not working anymore on the PCD3 or PCD2.M480

     Relevance:

      

     1%

     In firmware 03B and 03C an S-Bus broadcast telegram will block the communication interface until the next reboot of the PCD.

337. Timings Display PCD7.D120 with a PCD3.M5xxx

     Relevance:

      

     1%

     The settings for Clock period High and Clock period low must be 2 / 150 same settings as for the PCD2.M480.

338. Function block adapted for compatibility with the fast CPU PCD4.M170 (PCD9.H3 version 2.2)

     Relevance:

      

     1%

339. Modbus(for PCD3 and PCD2.M5xx0 FW 1.10.16 and later), version 1.0.017

     Relevance:

      

     1%

340. BIM - Motion control modules for servo drives

     Relevance:

      

     1%

     Motion control modules for servo drives for PCD3.M3xxx/..M5xxx/..M6xx0 Positioning module for 1 servomotor axis, encoder input 24 VDC/100 kHz, setpoint output ±10 V (12 bits) (connector type A included)