Your search returned 698 results

11. Why is the serial communication on PCD3.Mxxx7 or PCD2.M5xx7 Port 0 not working properly?

    Relevance:

     

    1%

    The serial communication on Port 0 works only when the PCD3 (or PCD2.M5547) is switched off, Run/Stop switch is set to Stop.

12. Why is the modem "MDLS144 onbit" no longer working on a new PCD?

    Relevance:

     

    1%

    If the "MDLS144/288 Data9600 onbit" modem is connected to a "non Saia PCD® COSinus" system (PCD1.M1, PCD2.M1) then it's possible to establish a modem connection to those systems but if the same modem is connected to a "Saia PCD® COSinus" System (PCD1.M2, PCD3, PCD2.M5) then it isn't possible to establish a connection.

13. Why is the message: "Failed to get data on alarm.exe" displayed on the alarming page?

    Relevance:

     

    1%

    This error message appears if the used firmware on the CPU does not support the "active and non ACK" filter for the S-Web alarming functionality (e.g. a PCD2.M150 with firmware 0D3).

14. Why is the instruction DSP not supported on Saia PCD® COSinus systems?

    Relevance:

     

    1%

    The IL instruction DSP (display value on PCD7.F530 display) is not supported on Saia PCD® COSinus systems. When downloading it to a Saia PCD® COSinus system, the PCD will not go in RUN and give an error message such as "Invalid instruction" (e.g. a PCD2.M480), "Precompiler error" or "Invalid OPCODE" (on a PCD3.M5xx0 with firmware 1.10.16).

15. Why is the Profibus / LON Communication not working on a PCD7.F772 or PCD7.F802

    Relevance:

     

    1%

    When using a PCD7.F772 or PCD7.F802 on a PCD2.M1x7 with FW Version 3.110 only the RS 485 communication works. Otherwise the Profibus / LON communication did not work.

16. Why is the Profi S-Link cable not working on the PCD3 / PCD2.M480?

    Relevance:

     

    1%

17. Why is the Port 3 on the PCD3.M5340 not running correctly in RS 485 mode?

    Relevance:

     

    1%

    The first versions of the PCD3.M5340 controller have been delivered with a firmware that does not support the usage of the RS485 port on port 3.

18. Why is the 1 MB internal flash memory with file system not available on PCD3.M2130V6?

    Relevance:

     

    1%

    To use the internal flash memory with file system on a PCD3 Compact (e.g. M2130V6), at least firmware version 1.08.12 is necessary!

19. Why is it no longer possible to switch on/off the relay outputs of the PCD3.WAC after installing PG5 SP2 (PG5 2.0.200)?

    Relevance:

     

    1%

    Due to an error in the PG5 device template file of PG5 2.0.200 it’s not possible to switch on/off the relay outputs of the PCD3.WAC CPUs. (PCD3.M2230A4T5, PCD3.M2330A4T1, PCD3.M2330A4T3, PCD3.M2330A4T5)

20. Why is it no longer possible to switch on/off the digital outputs of the PCD3.Compact after installing PG5 SP2 (PG5 2.0.200)?

    Relevance:

     

    1%

    Due to an error in the PG5 device template file of PG5 2.0.200 it’s not possible to switch on/off the digital outputs of the PCD3.compact CPUs. (PCD3.M2030V6, PCD3.M2130V6)