of the PCD3.M6860. In PG5 it’s possible to activate at the same time BACnet on ETH1 and ETH2 but we strongly recommend to use/activate BACnet only on one of the two Ethernet ports to avoid a [...] be loaded again). All PCD1.M2 and PCD2.M5 systems can be equipped with a firmware 1.16. and more recent [...] address bound to an IP address. Does a PCD generate gratuitous ARP telegrams? No, a PCD (e.g. a PCD3, a PCD2.M5xxx or a PCD equipped with a PCD7.F655) does not generate gratuitous ARP telegrams when
of the PCD3.M6860. In PG5 it’s possible to activate at the same time BACnet on ETH1 and ETH2 but we strongly recommend to use/activate BACnet only on one of the two Ethernet ports to avoid a [...] be loaded again). All PCD1.M2 and PCD2.M5 systems can be equipped with a firmware 1.16. and more recent [...] address bound to an IP address. Does a PCD generate gratuitous ARP telegrams? No, a PCD (e.g. a PCD3, a PCD2.M5xxx or a PCD equipped with a PCD7.F655) does not generate gratuitous ARP telegrams when
a version of PG5 2.0 more recent than 2.0.200 or copy the attached file "pcd3compactfamily.saiaxml" into the folder: c:\Program Files\SAIA-Burgess\PG5_20\DeviceTemplates\ and restart PG5 2 [...] Due to an error in the PG5 device template file of PG5 2.0.200 it’s not possible to switch on/off the relay outputs of the PCD3.WAC CPUs. (PCD3.M2230A4T5, PCD3.M2330A4T1, PCD3.M2330A4T3, PCD3.M2330A4T5) Problem Due to an error in the PG5 device template file of PG5 2.0.200 it isn't possible to switch on/off the relay outputs of the PCD3.WAC CPUs (PCD3.M2230A4T5, PCD3.M2330A4T1, PCD3.M2330A4T3, PCD3.M2330A
a version of PG5 2.0 more recent than 2.0.200 or copy the attached file "pcd3compactfamily.saiaxml" into the folder: c:\Program Files\SAIA-Burgess\PG5_20\DeviceTemplates\ and restart PG5 2 [...] Due to an error in the PG5 device template file of PG5 2.0.200 it’s not possible to switch on/off the relay outputs of the PCD3.WAC CPUs. (PCD3.M2230A4T5, PCD3.M2330A4T1, PCD3.M2330A4T3, PCD3.M2330A4T5) Problem Due to an error in the PG5 device template file of PG5 2.0.200 it isn't possible to switch on/off the relay outputs of the PCD3.WAC CPUs (PCD3.M2230A4T5, PCD3.M2330A4T1, PCD3.M2330A4T3, PCD3.M2330A
PCD2.W525 module is already plugged on delivery. If this module is missing, the controller doesn’t go into RUN-mode! With a PCD FW>1.22.25 a maximum of 10 selectable addresses are allowed. Check [...] other input? (FAQ #102007) With some specific sensor and configuration, the inputs of a module PCD2/3.W525 could perturbate an other input of the same module Module PCD2/3.W525 are not designed as other analog input modules (as PCD2/3.W340 or W200 for example). Particularities of the module W525 are the following
PCD2.W525 module is already plugged on delivery. If this module is missing, the controller doesn’t go into RUN-mode! With a PCD FW>1.22.25 a maximum of 10 selectable addresses are allowed. Check [...] other input? (FAQ #102007) With some specific sensor and configuration, the inputs of a module PCD2/3.W525 could perturbate an other input of the same module Module PCD2/3.W525 are not designed as other analog input modules (as PCD2/3.W340 or W200 for example). Particularities of the module W525 are the following
1 CPU base units with on-board I/O and for up to 2 plug-in I/O modules Modular room controllers Saia®PCD1.Room Saia® PCD1.Room with Ethernet TCP/IP Covers for PCD1.M2xxx E-Line CPU PCD1.M2220-C15 The Saia PCD® controller PCD1.M2200-C15 functions as a master for the attached modules. Here it [...] -Monitoring function Analogue output module (only for PCD1 and PCD2.M4x60) Analogue output module (only for PCD1 and PCD2.M4x60)
/3.Mxxxx) exist a replacement PCD2.H112/H114 and PCD3.H112/H114 [...] Product Category Programmable controller PCD2: CPUs, flat design Hxxx: counting and motion H [...] PCD2.H1xx Counting / SSI modules Documentation
/3.Mxxxx) exist a replacement PCD2.H112/H114 and PCD3.H112/H114 [...] Product Index PCD2 Hxxx: Counting and motion H1xx General [...] PCD2.H1xx Counting / SSI modules Documentation
PCD2.G200 Multifunction I/O module with: - 4 digital inputs 24VDC - 4 digital outputs 24VDC - 8 analogue inputs, 12 bit - 8 analogue outbuts, 10 bit Introduction The PCD2.G200 is a double multifunction I/O module that can be used both in the PCD1.M2xxx and the PCD2.M5xxx. The module uses two I/O slots. Documentation [...] Product Category Programmable controller PCD2: CPUs, flat design Gxxx: Special modules G200
