Your search returned 817 results

791. Why is it no longer possible to switch on/off the relay outputs of the PCD3.WAC after installing PG5 SP2 (PG5 2.0.200)?

     Relevance:

      

     25%

     Due to an error in the PG5 device template file of PG5 2.0.200 it’s not possible to switch on/off the relay outputs of the PCD3.WAC CPUs. (PCD3.M2230A4T5, PCD3.M2330A4T1, PCD3.M2330A4T3, PCD3.M2330A4T5)

792. Why is the "select" button missing in the "Macro Find/Replace" dialog?

     Relevance:

      

     12%

     With the Web Editor version 5.15.02 (installed together with PG5 2.0 SP2; PG5 2.0.200) the button "Select" is missing when using the dialog "Replace" to select a group name for the macro Find/Replace feature.

793. Why is the Profibus / LON Communication not working on a PCD7.F772 or PCD7.F802

     Relevance:

      

     10%

     When using a PCD7.F772 or PCD7.F802 on a PCD2.M1x7 with FW Version 3.110 only the RS 485 communication works. Otherwise the Profibus / LON communication did not work.

794. Why is the TCO output of the PCD2.H110 not detected by the interrupt input of a PCD2.M480?

     Relevance:

      

     12%

     In the manual of the PCD2.H110 you can find an example of automatic period measurement where the XOB 20 is used for reading the measurement continuously. This example doesn't work on a PCD2.M480 due to it's input filter of the interrupt input INx that is connected to the TCO signal of the PCD2.H110.

795. Why is the diagnostic flag "ManagerNotPresent" on the RIO not set?

     Relevance:

      

     16%

     On the programmable Smart Ethernet RIO PCD3.T66x there is a diagnostic flag available which can be used to detect whether the RIO Manager CPU is exchanging data with the RIO. However, when using PG5 2.0.200 this flag is not correctly addressed.

796. Why is the instruction DSP not supported on Saia PCD® COSinus systems?

     Relevance:

      

     9%

     The IL instruction DSP (display value on PCD7.F530 display) is not supported on Saia PCD® COSinus systems. When downloading it to a Saia PCD® COSinus system, the PCD will not go in RUN and give an error message such as "Invalid instruction" (e.g. a PCD2.M480), "Precompiler error" or "Invalid OPCODE" (on a PCD3.M5xx0 with firmware 1.10.16).

797. Why is the message: "Failed to get data on alarm.exe" displayed on the alarming page?

     Relevance:

      

     8%

     This error message appears if the used firmware on the CPU does not support the "active and non ACK" filter for the S-Web alarming functionality (e.g. a PCD2.M150 with firmware 0D3).

798. Why is the modem "MDLS144 onbit" no longer working on a new PCD?

     Relevance:

      

     11%

     If the "MDLS144/288 Data9600 onbit" modem is connected to a "non Saia PCD® COSinus" system (PCD1.M1, PCD2.M1) then it's possible to establish a modem connection to those systems but if the same modem is connected to a "Saia PCD® COSinus" System (PCD1.M2, PCD3, PCD2.M5) then it isn't possible to establish a connection.

799. Why is there an offset to the current PCD time in the alarming timestamp?

     Relevance:

      

     9%

     In case a BACnet firmware module has been installed on a PCD3.Mxxx0 or a PCD2.M5xx0 and a timezone has been configured, the time stamp of an S-Web alarm has an offset to the PCD time. There could be the same behaviour when you are using the SNTP (Simple Network Time Protocol).

800. Why isn't it possible executing a second homing after an aborted homing?

     Relevance:

      

     7%

     It isn't possilbe to proceed a second homing after the first attempt faild (e.g. due to a timeout) on the PCD2.H32x modules. What is the reason and how do I get the servo running again?