Your search returned 817 results

771. Why does Windows find a new USB device for every PCD?

     Relevance:

      

     8%

     If a PCD is connected to the PC via USB cable, the new firmware PCD3 V010 and PCD2.M480 V020 do send a unique ID in their StringVendorRequest (iSerialNumber). This has to be done this way because it's the only way to distinguish between several devices with the same VID/PID (VendorID/ProductID) in a USB bus system.

772. Why does a PCD7.F120 not work when used on a PCD3 or a PCD2.M5?

     Relevance:

      

     15%

     When mounting a PCD7.F120 into a PCD3.F121 / PCD3.F2xx or when using a PCD7.F120 on a PCD2.M5, the communication doesn't work. The reason therefore is an incompatibility between the PCD7.F120 and PCD3.Fxxx (or PCD2.M5) modules and the old .

773. Why does my PCD1 no longer start (due to a "Text segment error") after downloading a project with PG5 2.0?

     Relevance:

      

     12%

     On PCD1.M1x0 or a PCD2.M110/120 with old firmware version the CPU won't go in run anymore after downloading the project with PG5 2.0.110.

774. Why does my PG5 2.0.200 installation fails with a „rolling back action“?

     Relevance:

      

     26%

     In very rare cases, the installation process of PG5 2.0.200 (SP2) leads into error “Error -1603 Fatal error during installation.” at the very end of the installation. Then, also a rolling back action of the installation will take place. The installation failed.

775. Why does my S-Bus communication with an PCD3.F2xx module show a diagnostic error?

     Relevance:

      

     10%

     The Sasi S-Bus Master F-Box indicates a diagnostic error and is red. The data is transmitted but obviously not properly.

776. Why does only one PCD2.R6000 work on my PCD2.M5xxx?

     Relevance:

      

     9%

     In case more than one PCD2.R6000 produced before August 2009 are installed on a PCD2.M5xxx, the PCD does not properly initialize the file systems during start up. As result the file systems can not be used (and are not visible on the FTP server of the PCD).

777. Why does the "Error 335:...Invalid register number" appear on build?

     Relevance:

      

     12%

     When choosing the dynamic registers above 8191 on a PCD2.M5xx0, a PCD2.M480 or a PCD3, this error message can appear in case FBoxes are used which apply "indirect instructions".

778. Why does the CPU crash when reading the diagnostic buffer?

     Relevance:

      

     10%

     On PCD2.Mx57 and PCD2.M177 the request can cause a crash when requesting more than 20 entrys. The problem is corrected in firmware version 3.118

779. Why does the Error LED of my PCD2.M127 blink?

     Relevance:

      

     9%

     The Error LED of the PCD2.M127 does blink in case a PCD2.F7xx module is configured but the communication (Profibus or LON) is not working (e.g. because the module itself or a configured Profibus DP slave is not present).

780. Why does the FB Home not work on a PCD2/3.H210?

     Relevance:

      

     10%

     There has been a bug in the FPGA versions older than HD6 that caused the FB Home not to work if a limit switch was active on power up of the PCD.