101653 . Minimal firmware version for the Manager is 1.16.42 (PCD1.M2) and 1.16.45 (PCD2.M5 and PCD3), see FAQ 101640 . Minimal version of PG5 for configuring a PCD3.T665¦T666 is PG5 2.0 SP2 (PG5 2.0.200). When replacing a PCD3.T660 by a PCD3.T665 the user program needs to be adapted accordingly. I/O modules: The I/O modules are delivered per default with a spring clamp terminal [...] RIO PCD3.T66x there is a diagnostic flag available which can be used to detect whether the RIO Manager CPU is exchanging data with the RIO. However, when using PG5 2.0.200 this flag is not correctly
(degrees for temperature and e.g. mV for the voltage inputs). Procedure In the S-Net configurator, select a PCD3.W200 for the module where the PCD2.W220Z12 is plugged Select the format [...] default with a spring clamp terminal block. Screw terminal blocks have to be ordered separately . PCD3 LIO and PCD2.M17x: to use addresses in the range 256 to 511, CPU's with production date 0331 [...] information of a PCD3.W745 on a PCD3.T760? (FAQ #101697) When the 4 channels analog carte PCD2.W745 is used on a PCD3.T760 RIO
(degrees for temperature and e.g. mV for the voltage inputs). Procedure In the S-Net configurator, select a PCD3.W200 for the module where the PCD2.W220Z12 is plugged Select the format [...] default with a spring clamp terminal block. Screw terminal blocks have to be ordered separately . PCD3 LIO and PCD2.M17x: to use addresses in the range 256 to 511, CPU's with production date 0331 [...] information of a PCD3.W745 on a PCD3.T760? (FAQ #101697) When the 4 channels analog carte PCD2.W745 is used on a PCD3.T760 RIO
Documentation Good to know The PCD2.T813Z42 is a variant of the PCD2.T813 and is compatible with the PCD2.T813 except for the DTMF functions. To use the PCD2.T813Z42 with the DTMF functions of the modem library, at least version 2.2.007 is required. The PCD2.T813Z42 is a 56k analog modem and supports the V90 standard, V92 is not supported. [...] Product Category Programmable controller PCD2: CPUs, flat design Txxx: Internal modems T
Documentation Good to know The PCD2.T813Z42 is a variant of the PCD2.T813 and is compatible with the PCD2.T813 except for the DTMF functions. To use the PCD2.T813Z42 with the DTMF functions of the modem library, at least version 2.2.007 is required. The PCD2.T813Z42 is a 56k analog modem and supports the V90 standard, V92 is not supported. [...] Product Index PCD2 Txxx: Internal modems T8xx General
synchronization of a PCD within a LAN without internet access (FAQ #101884) Solution: A Windows PC (or Windows Server) can be configured as an NTP server. The PCD's can read the time via SNTP from this NTP server. Problem: The clock of PCD's, located in a LAN without internet access should be synchronized over SNTP. Solution: If there is a PC on the same network, then this PC could be used as SNTP Server for the PCD's . The PCD's could read the time via SNTP from this NTP
There is a difference in the "SBC Format" between "old" xx7 CPU's (PCD2.M127, 157, 177) and Saia PCD® COSinus based CPUs (PCD3, PCD2.M5xxx7 and PCD2.M487). The way to read analogue values from PCD2/3.W2xx and PCD2/3.W100, W3x0, W500 in the "SBC-Format" is not the same.
On a PCD1.M2 if you define 2 PCD2.W525 with the media mapping activated there will be an error after the download of the program and the PCD1.M2 will stay in halt.
XOBs 20 and 25 are called when interrupt input INB1 or INB2 of the PCD1/2 has detected a rising edge.
If the master is a PCD2 with a PCD7.F750 the maximal configuration is 2942 Bytes I/O. When adding a SBC Slave to the network this limite is reduced to 2048.
