Your search returned 817 results

51. Why do measured input values for PCD2.W3x5 / PCD3.W3x5 cards "freeze"

    Relevance:

     

    8%

    It can occur that the value measured from the PCD2.W3x5 / PCD3.W3x5 modules 'freeze' during a time of about 1 to 2 minutes. Afterwards, the modules function again and the measured analog input value is updated again in the application program.

52. Why do PCD3.Wxxx input modules placed on an extension modules PCD3.Cxxx not work properly?

    Relevance:

     

    10%

    This phenomenon could be caused by a missing power supply or if the current consumption of the I/O modules exceeds the maximum supply of the extension module. A missing jumper inside the PCD3.C200 can lead to this situation, too!

53. Why do I get wrong values when reading a PCD2/3.W340 with media mapping?

    Relevance:

     

    10%

    PCD2.M5xx0 and the PCD3.Mxxx0 systems equipped with firmware 1.10.16 did not correctly calculate the temperature values of NI1000 temperature sensors measured with PCD2/3.W340 input modules.

54. Why do I get a "DUART HW ERROR" on PCD2.M150 after restart?

    Relevance:

     

    12%

    Communication on port 3 (PCD2.F520) during startup can lead to a DUART HW ERROR on the PCD2.M150

55. Why do I get IP communication errors from time to time on a PCD2.M554x?

    Relevance:

     

    10%

    The constellation of the CPU of the PCD2.M5540 and the on-board switch which is leads to the situation that (very few) telegrams may be lost. This fact can lead to the situation that the Error LED of e.g. a SASI IP Master FBox (or any communication FBox) turns red after a certain time of running communication.

56. Why can't I import a Fupla *.fxp-file in PG5 2.0.200 (SP2)?

    Relevance:

     

    27%

    A fupla file generated from the contect menu of the Fupla page navigator, the content of this *.fxp file is empty and leads to a blocked Fupla Editor when trying to import it.

57. Why can't I download an I/O configuration to a PCD3.T760?

    Relevance:

     

    9%

    Also it is possible connecting the Web Server of a PCD3.T760 using WebConnect 2.x, it is not automatically possible downloading a new I/O configuration.

58. Why can't I connect a PCD2.M480 (with firmware 039) over the serial PGU port?

    Relevance:

     

    10%

    Due to a problem of the firmware version 039 the serial PGU connection on the PGU port does not work.

59. Why can't I change the Profi-S-Bus address on a PCD3.M6540 Port 2?

    Relevance:

     

    10%

    When using firmware version 1.08.23 the Profi S-Bus address can only be set one time on the PCD3.M6540 port 2.

60. Why can't I build a Fupla containing the "EIB driver FT1.2" project with PG5 2.0.200?

    Relevance:

     

    27%

    When using the EIB/KNX driver FBox "EIB driver FT1.2" with PG5 2.0.200 (and the EIB FBox library SP2.6.210) the build of the project fails due to a fatal error.