of the PCD3.M6860. In PG5 it’s possible to activate at the same time BACnet on ETH1 and ETH2 but we strongly recommend to use/activate BACnet only on one of the two Ethernet ports to avoid a [...] be loaded again). All PCD1.M2 and PCD2.M5 systems can be equipped with a firmware 1.16. and more recent [...] address bound to an IP address. Does a PCD generate gratuitous ARP telegrams? No, a PCD (e.g. a PCD3, a PCD2.M5xxx or a PCD equipped with a PCD7.F655) does not generate gratuitous ARP telegrams when
It is not possible to select PCD3.M6860 with Profi-SIO (Saia PG5 Network configurator) altough the PCD3.M6860 is supported with PG5 2.1.xxx or higher. If you select a wrong type, the error message "Warning 562 appears". If you try to compile a project with wrong configuration, it will fail with error 563.
. 32 GByte, 2 Ethernet, 1 RS-485, 1 socket for PCD7.F1xxS communication modules, 1 USB Device port for programming and service, 1 USB host, 1 CAN port (20a and 20b) 2 interrupt inputs, 1 watch dog relay, extendable up to 1023 I/O. I/O Extension for: Slot 4 to 7 PCD3.C200, Slot > 7 PCD3.C100, PCD3.C200 as usual Supported PCD3 - I/O Modules: Supported PCD3 - I/O Modules: Starting with firmware 3.0.0: PCD3.Ax, PCD3.Ex, PCD3.W2x, PCD3.W3x, PCD3.W6x, PCD3.W745
. 32 GByte, 2 Ethernet, 1 RS-485, 1 socket for PCD7.F1xxS communication modules, 1 USB Device port for programming and service, 1 USB host, 1 CAN port (20a and 20b) 2 interrupt inputs, 1 watch dog relay, extendable up to 1023 I/O. I/O Extension for: Slot 4 to 7 PCD3.C200, Slot > 7 HPCD3.C100, HPCD3.C200 Supported PCD3 - I/O Modules: Supported PCD3 - I/O Modules: Starting with firmware 3.0.0: PCD3.Ax, PCD3.Ex, PCD3.W2x, PCD3.W3x, PCD3.W6x, PCD3.W745
This firmware could be used as maintenance firmware for PCD's with 8 MB firmware memory. Do use at least the PG5 firmware downloader version 2.1.311 or newer (included in PG5 patch 2.1.311 or newer) to prevent the loading of the FW 1.24.xx to a not compatible PCD.
FW for the PCD3.Mxx60. This firmware does support the module PCD7.R610 Do use at least the PG5 firmware downloader version 2.1.311 or newer (included in PG5 patch 2.1.311 or newer) to prevent the loading of the FW 1.24.xx to a not compatible PCD.
This firmware is used in the PCD production and the PCD's are shipped with this firmware. Do use at least the PG5 firmware downloader version 2.1.311 or newer (included in PG5 patch 2.1.311 or newer) to prevent the loading of the FW 1.24.xx or 1.26.xx or newer to a not compatible PCD.
This firmware could be used as maintenance firmware for PCD's with 8 MB firmware memory. Do use at least the PG5 firmware downloader version 2.1.311 or newer (included in PG5 patch 2.1.311 or newer) to prevent the loading of the FW 1.24.xx to a not compatible PCD.
FW for the PCD3.Mxxx0 This firmware does support the module PCD7.R610 Do use at least the PG5 firmware downloader version 2.1.311 or newer (included in PG5 patch 2.1.311 or newer) to prevent the loading of the FW 1.24.xx to a not compatible PCD.
This firmware is used in the PCD production and the PCD's are shipped with this firmware. Do use at least the PG5 firmware downloader version 2.1.311 or newer (included in PG5 patch 2.1.311 or newer) to prevent the loading of the FW 1.24.xx to a not compatible PCD.
