..3 Documentation Firmware used in production Good to know A PCD2.F21x0, F22x0 and F28x0 module can be equipped with one additional PCD7.F1xx(S) module. The PCD2.F2xxx modules can be used in I/O slots 0 to 3 of PCD2.M5 or I/O slot 0 or 1 on a PCD2.M4 or PCD1.M2 [...] Product Category Programmable controller PLC Accessories Communication Modules PCD2.F2
. PCD2.A3xx Digital output modules (2 A [...] Product Category Archive HMI 7 Segment Display PCD2.F510 General FAQ The requested software / document is no longer marketed by Saia
. Since beginning of 1998 all PCD2 are equipped with a real time clock, so the PCD2.F5xx modules don't contain an RTC any more. Refer to your local sales company if you need cards with RTC for use with PCD2 [...] Product Category Programmable controller PLC Accessories Communication Modules PCD2 [...] PCD2.F5xx Serial communication modules Documentation
4 digital inputs 4 digital outputs 8 analogue inputs, 12 bit 8 analogue outbuts, 10 bit
Fast Counter Module for Saia PCD2 and Saia PCD3 This universal module enables counting functions up to 150 kHz for controller PCD2 and PCD3. Absolute encoder module with SSI interface and 4 outputs 24 VDC/0.5 A The communication between PCD and Fast Counter Module happens over the IO-bus.
This product is outphased. Please have a look at the replacement modules PCD2.H222 and PCD3.H222
This low priced module can be plugged into any E/A socket of a PCD1, PCD2 or PCD3. Its purpose is to activate the power stages to two stepper motor axis up to a frequency of 20 kHz.
Relay interface to PCD2/3.A460 with 8 plug-in relays. The logical state of the relay is displayed with a LED: Relay switched on LED on Relay switched off LED off PCD end: 16-pole ribbon connector I/O (or 12 screw terminals J1) Process end: 24 screw terminals 0.5…1.5 mm2 Switching capacity of the changeover contacts: 10 A / 250 VAC or 10 A / 24 VDC (ohmic)
The serial port 3 is not available, even not with communication modules like the PCD2.F550, PCD7.F772, PCD7.F802. The serial port 2 can only be used with terminal kits PCD7.D162 (including a PCD2 [...] MC5 mode on F2xxx module All PCD’s: RS485 driver keep holding bus after a while All PCD’s: Http request ‘is modified’ is not handled correctly on the PCD Web-Server which lead to the effect that [...] (CVE-2017-9628) All PCD's: The Modbus CSF CloseSRPort does not free the port then a open/SASI call give an error and the port does not work. PCD1.M2xx0 PCD1.M22x0 PCD2.M4x60: PCD can crash while power down
Firmware Software Good to know The PCD2.M120 has been phased-out in 2009 (repair service until end of 2014). As possible replacement a PCD2.M150 or a PCD2.M5xx0 can be used [...] MC5 mode on F2xxx module All PCD’s: RS485 driver keep holding bus after a while All PCD’s: Http request ‘is modified’ is not handled correctly on the PCD Web-Server which lead to the effect that [...] (CVE-2017-9628) All PCD's: The Modbus CSF CloseSRPort does not free the port then a open/SASI call give an error and the port does not work. PCD1.M2xx0 PCD1.M22x0 PCD2.M4x60: PCD can crash while power down
