/improved No error message if fails to write backup file. e.g. when saving a file in the Common Files directory. Patch installer works also for W2k New features in PG5 Support of PCD3 Compact with [...] version 2.6.165. Symptom After having changed the operation mode of a PCD7.L60x Room controller from "autonomous" to "slave" the output values for the heating and cooling signal are not [...] replacing a DX system by a PCD without the need to replace all the XT extensions, too. Therefore the FBox library for the Johnson Controls JCI N2-Bus is designed to connect XT 9100 extension modules (where
version 2.5.171 contains a new SASI FBox explained in FAQ 101469 . The HEAVAC FBox library version $2.5.318 contains an improvement explained in FAQ 101563 . The PCD7.L60x Room controller library 2.5.166 contains a correction explained in FAQ 101514 . The PCD7.L60x Room controller library 2.5.165 contains a correction explained in FAQ 101506 . The DDC Suite FBox [...] 101432 . The HDLog to File FBox library version 2.1.040 contains a small correction explained in FAQ 101421 . The PCD7.L60x Room controller library 2.5.101 contains a correction explained
. The differences between the PCD7.L79x and PCD7.L79xN are described in the following document. There is a program example for the PCD7.L79xN available in the Getting Started section . PCD7.L79x units delivered until summer 2010 were sensitive to crossed polarity of the AC Power supply ( see link ). This is no longer the case with hardware version 2.0. [...] Product Index Archive PCD7 Lxxx: RIOs and Room Controllers L
inputs of a module PCD2/3.W525 could perturbate an other input of the same module Module PCD2/3.W525 are not designed as other analog input modules (as PCD2/3.W340 or W200 for example). Particularities [...] connected with a wire as short and thick as possible to pin 22/23 (for PCD1) or pin 23/24 (for PCD2) respectively [...] correctly. Solution This problem is solved with hardware version A or C and newer of the PCD2.W6x5 or PCD3.W6x5 respectively
MC5 mode on F2xxx module All PCD’s: RS485 driver keep holding bus after a while All PCD’s: Http request ‘is modified’ is not handled correctly on the PCD Web-Server which lead to the effect that [...] (CVE-2017-9628) All PCD's: The Modbus CSF CloseSRPort does not free the port then a open/SASI call give an error and the port does not work. PCD1.M2xx0 PCD1.M22x0 PCD2.M4x60: PCD can crash while power down [...] SRPort does not free the port then a open/SASI call give an error and the port does not work. PCD1.M2xx0 PCD1.M22x0 PCD2.M4x60: PCD can crash while power down when XOB 0 is programmed. PCD1.M2xx0 PCD
MC5 mode on F2xxx module All PCD’s: RS485 driver keep holding bus after a while All PCD’s: Http request ‘is modified’ is not handled correctly on the PCD Web-Server which lead to the effect that [...] (CVE-2017-9628) All PCD's: The Modbus CSF CloseSRPort does not free the port then a open/SASI call give an error and the port does not work. PCD1.M2xx0 PCD1.M22x0 PCD2.M4x60: PCD can crash while power down [...] SRPort does not free the port then a open/SASI call give an error and the port does not work. PCD1.M2xx0 PCD1.M22x0 PCD2.M4x60: PCD can crash while power down when XOB 0 is programmed. PCD1.M2xx0 PCD
. Be aware that the PCD4.M170 is not equipped with the accu bloc. For this CPU a 3V Lithium battery Renata CR2032 (4 507 4817 0) is required PCA programm update when replacing PCA2.D12 with PCD7.D120 (FAQ #100668) The attachment contains a program example for [...] series have been replaced by the PCD series quite a long time ago. As long as the parts stock lasts we are repairing the units here in Murten, but it is getting more and more difficult to give support on
7.T160 D-Sub 9pin on PCD Port 2 on PCD3.M3 and M6 A=RxD /TxD-N green D pin 8 D B=RxD /TxD-P red D/ pin 3 /D Example [...] 3): PCD3.M5540 (D-Sub "S-Net", port 3) PCD2.M5540, X3, port2 equipped with a PCD7.F110 pin 3 terminal 2 pin 8 terminal 1 [...] PG5 2.0 / Profibus FMS Why after a SASI
power calculation of the I/O modules the Device Configurator from PG5 2.0. SP2 or later is to be used. PG5 2.0 Device Configurator does also feature a label creator for the I/Os on the RIO [...] . When replacing the PCD3.T660 Ethernet RIO with a PCD3.T665 or PCD3.T666 , the user program of the Manager has to be adapted [...] . Why doesn't the PCD3.T660 accept any configuration anymore? (FAQ #101289) In case the Ethernet RIO stays in a state
The serial port 3 is not available, even not with communication modules like the PCD2.F550, PCD7.F772, PCD7.F802. The serial port 2 can only be used with terminal kits PCD7.D162 (including a PCD2 [...] MC5 mode on F2xxx module All PCD’s: RS485 driver keep holding bus after a while All PCD’s: Http request ‘is modified’ is not handled correctly on the PCD Web-Server which lead to the effect that [...] (CVE-2017-9628) All PCD's: The Modbus CSF CloseSRPort does not free the port then a open/SASI call give an error and the port does not work. PCD1.M2xx0 PCD1.M22x0 PCD2.M4x60: PCD can crash while power down
