The PCD8.P100 has been discontinued in 2008 (repair service until end of 2013). For programming PCD controllers the software PG5 can be used together with e.g. a laptop. If you want to program PCD1.Mxxx, PCD2.M150/170, PCD4.M170 or PCD6.M300 you need the intermediate firmware version $301 since S-Bus is not supported by earlier versions. Contact your local SAIA sales company to get this firmware. For the use with PCD1 the use of a PCD8.K101 programming calbe is recommended since with a PCD8.K100 the relatively large inrush current of the P100 can cause the PCD1 to restart when connecting to
. Be aware that the PCD4.M170 is not equipped with the accu bloc. For this CPU a 3V Lithium battery Renata CR2032 (4 507 4817 0) is required PCA programm update when replacing PCA2.D12 with PCD7.D120 (FAQ #100668) The attachment contains a program example for [...] series have been replaced by the PCD series quite a long time ago. As long as the parts stock lasts we are repairing the units here in Murten, but it is getting more and more difficult to give support on
. Be aware that the PCD4.M170 is not equipped with the accu bloc. For this CPU a 3V Lithium battery Renata CR2032 (4 507 4817 0) is required PCA programm update when replacing PCA2.D12 with PCD7.D120 (FAQ #100668) The attachment contains a program example for [...] . PCA series (obsolete, replaced by PCD series) Software Remember that the PCA series have been replaced by the PCD series quite a long time ago. As long as the parts stock lasts we
. Be aware that the PCD4.M170 is not equipped with the accu bloc. For this CPU a 3V Lithium battery Renata CR2032 (4 507 4817 0) is required PCA programm update when replacing PCA2.D12 with PCD7.D120 (FAQ #100668) The attachment contains a program example for [...] commercially available products. PCA2.D12 Remote display (obsolete, replaced by PCD7.D120) Documentation
. Be aware that the PCD4.M170 is not equipped with the accu bloc. For this CPU a 3V Lithium battery Renata CR2032 (4 507 4817 0) is required PCA programm update when replacing PCA2.D12 with PCD7.D120 (FAQ #100668) The attachment contains a program example for [...] . PCA2.D12 Remote display (obsolete, replaced by PCD7.D120) Documentation
space for the new firmware features. The first PCD's were equipped with a 2 MB memory which was increased gradually. Using the hardware version number which can be red out online via PG5 over the [...] media (Flags, Registers, Timers/Counters) remains unchanged. However: Updating to FW 1.20.xx or higher from a version 1.16.xx deletes the data on SRAM. PCD2.M5xx0 & PCD [...] 5 firmware downloader version 2.1.311 or newer (included in PG5 patch 2.1.311 or newer) to prevent the loading of the FW 1.24.xx, 1.26.xx or newer to a not compatible PCD Firmware 1.28.51 (April 2022
space for the new firmware features. The first PCD's were equipped with a 2 MB memory which was increased gradually. Using the hardware version number which can be red out online via PG5 over the [...] media (Flags, Registers, Timers/Counters) remains unchanged. However: Updating to FW 1.20.xx or higher from a version 1.16.xx deletes the data on SRAM. PCD2.M5xx0 & PCD [...] 5 firmware downloader version 2.1.311 or newer (included in PG5 patch 2.1.311 or newer) to prevent the loading of the FW 1.24.xx, 1.26.xx or newer to a not compatible PCD Firmware 1.28.51 (April 2022
BELIMO® MP Bus compatibilty certificate OPC Data Access (DA) 2.05a compliance test results (OPC foundation) Maritim / Type [...] Services Certificates / Quality PCD/PCS General [...] for PCD Products EC declarations of conformity Information about the CE declarations of conformity (DoC) All declarations of conformity (DoC) have been reworked to
diagnostic information of a PCD3.W745 on a PCD3.T760? (FAQ #101697) When the 4 channels analog carte PCD2.W745 is used on a [...] ): Why does my PCD7.F7500 not work on my PCD2.M5540? (FAQ #101655) In some cases it is possible that a PCD7.F7500 is not correctly detected on a PCD2.M5540 with hardware version without modification 6 or later. Symptom The Profibus Master module PCD7.F7500 does not work while commissioning. During start-up of the
diagnostic information of a PCD3.W745 on a PCD3.T760? (FAQ #101697) When the 4 channels analog carte PCD2.W745 is used on a [...] ): Why does my PCD7.F7500 not work on my PCD2.M5540? (FAQ #101655) In some cases it is possible that a PCD7.F7500 is not correctly detected on a PCD2.M5540 with hardware version without modification 6 or later. Symptom The Profibus Master module PCD7.F7500 does not work while commissioning. During start-up of the
