PCD6.E100, PCD6.E610, PCD6.E611 or PCD6.A350 (FAQ #100264) These 4 digital I/O cards have all an address [...] . Nevertheless it is possible measuring the range 0..20 mA with the analogue input modules for PCD systems. Why do the SBC input modules have a range of 0..20 mA? One advantage of measuring the [...] the used power supply does not have the +/-15V the analogic carts can not work. With the PCD4/6.N200 supply it is not possible to use analogic cards. You will need the PCD4/6.N210 supply
PCD6.E100, PCD6.E610, PCD6.E611 or PCD6.A350 (FAQ #100264) These 4 digital I/O cards have all an address [...] . Nevertheless it is possible measuring the range 0..20 mA with the analogue input modules for PCD systems. Why do the SBC input modules have a range of 0..20 mA? One advantage of measuring the [...] the used power supply does not have the +/-15V the analogic carts can not work. With the PCD4/6.N200 supply it is not possible to use analogic cards. You will need the PCD4/6.N210 supply
Windows Server 2008 (also R2) on 32 bit and 64 bit computers, but since it is not possible to use the Scomm.dll (which is used to communicate between the PC and the PCD) as service it is necessary that a [...] imported. The OPC server allows to import resources from a PG 4/5 project. There is the possibility to import files of 2 different types: _.sy5 and _.pcd. When importing _global.sy5 file [...] the "PcdLastCom" DWord variable with a value greater than 20 hex (32 dec) for example 40 hex (64 dec) This new value represents the maximum number of accessible/scanned ComPorts by PG5 PG5 2
Scomm.dll (which is used to communicate between the PC and the PCD) as service it is necessary that a user is logged in on the PC. News: Since the version 2.02.17.10 of the OPC Server the USB [...] imported. The OPC server allows to import resources from a PG 4/5 project. There is the possibility to import files of 2 different types: _.sy5 and _.pcd. When importing _global.sy5 file [...] PCD8.OPC-x OPC Server for SBC S-Bus OPC-Server Good to know The main differences between version 2
Scomm.dll (which is used to communicate between the PC and the PCD) as service it is necessary that a user is logged in on the PC. News: Since the version 2.02.17.10 of the OPC Server the USB [...] imported. The OPC server allows to import resources from a PG 4/5 project. There is the possibility to import files of 2 different types: _.sy5 and _.pcd. When importing _global.sy5 file [...] PCD8.OPC-x OPC Server for SBC S-Bus OPC-Server Good to know The main differences between version 2
Due of a firmware error on the COSinus FW 1.20.25 it’s not possible to communicate over RS232 on the port 0 of the PCD2.M5440 and port 1 of PCD3 CPU’s, but only on PCD’s without Ethernet port. The error is fixed since the FW 1.20.31. Also the FW 1.16.69 doesn’t have this error. PCD’s equipped with a Ethernet port doesn’t have this error. The concerned PCD’s are: • PCD2.M5440 (port 0 / RS232) • PCD3.M6440/M5440/M3230 (port 1 / PCD3.F121) • PCD3.M3020 (port 1 / PCD3.F121) • PCD3.M2030V6 (port 1 / PCD7.F121S) • PCD3.M2230A4T5 (port 1 / PCD7.F121S) Communication over RS485 works
Due of an error on PG5 2.1.200 it’s possible that on non NT Systems (PCS1, PCD1.M1xx, PCD2.M1xx) the Fupla online connections between F-Boxes does show a randomly status. That means that the connection between F-Boxes are set to 0/1 not as they should but in a randomly way. It’s possible that on the history there is also an error message ‘IR Overflow’ (Index Register Overflow)
If the PCD2/3.W220Z18 card is plugged in to a ‘Power PCD‘ or a PCD2.C1000 or PCD2.C2000 and if all 8 analog inputs channels of the PCD2/3.W220Z18 module are connected to 8 PT100 sensors then the measured PT100 temperature values of the 8 channels are not correct. ‘Power PCD’s’ are: PCD1.M2x20, PCD1.M2160, PCD1.M2220-C15 PCD2.M5540, PCD2.M5440, PCD2.M4160, PCD2.M4560 PCD3.Mxx60 To solve the issue, use and connect only up to 7 PT100 sensors to the PCD2/3.W220Z18 or do use a PCD2/3.W350 module, if all 8 PT100 are needed.
Yes it’s possible to use BACnet on both ports ETH1 or ETH2 of the PCD3.M6860. In PG5 it’s possible to activate at the same time BACnet on ETH1 and ETH2 but we strongly recommend to use/activate BACnet only on one of the two Ethernet ports to avoid a bad behavior on BACnet.
