(or in case a PC is used, by interpreting the tracewin files). This phenomenon can be observed on PCD1.M1x5, PCD2.M150, PCD2/4.M170 and PCS1 systems (with firmware which are supporting the "Secure S [...] appears if the used firmware on the CPU does not support the "active and non ACK" filter for the S-Web alarming functionality (e.g. a PCD2.M150 with firmware 0D3). Symptom Instead of the [...] . Systems introduced before 2003: All PCD1, PCD2 (except PCD2.M480), PCD4 and PCD6 as well as PCS1 classic contollers do have a baud rate limitation of 38.4 kB/s on each serial port. For
(or in case a PC is used, by interpreting the tracewin files). This phenomenon can be observed on PCD1.M1x5, PCD2.M150, PCD2/4.M170 and PCS1 systems (with firmware which are supporting the "Secure S [...] appears if the used firmware on the CPU does not support the "active and non ACK" filter for the S-Web alarming functionality (e.g. a PCD2.M150 with firmware 0D3). Symptom Instead of the [...] . Systems introduced before 2003: All PCD1, PCD2 (except PCD2.M480), PCD4 and PCD6 as well as PCS1 classic contollers do have a baud rate limitation of 38.4 kB/s on each serial port. For
a version of PG5 2.0 more recent than 2.0.200 or copy the attached file "pcd3compactfamily.saiaxml" into the folder: c:\Program Files\SAIA-Burgess\PG5_20\DeviceTemplates\ and restart PG5 2 [...] Due to an error in the PG5 device template file of PG5 2.0.200 it’s not possible to switch on/off the relay outputs of the PCD3.WAC CPUs. (PCD3.M2230A4T5, PCD3.M2330A4T1, PCD3.M2330A4T3, PCD3.M2330A4T5) Problem Due to an error in the PG5 device template file of PG5 2.0.200 it isn't possible to switch on/off the relay outputs of the PCD3.WAC CPUs (PCD3.M2230A4T5, PCD3.M2330A4T1, PCD3.M2330A4T3, PCD3.M2330A
a version of PG5 2.0 more recent than 2.0.200 or copy the attached file "pcd3compactfamily.saiaxml" into the folder: c:\Program Files\SAIA-Burgess\PG5_20\DeviceTemplates\ and restart PG5 2 [...] Due to an error in the PG5 device template file of PG5 2.0.200 it’s not possible to switch on/off the relay outputs of the PCD3.WAC CPUs. (PCD3.M2230A4T5, PCD3.M2330A4T1, PCD3.M2330A4T3, PCD3.M2330A4T5) Problem Due to an error in the PG5 device template file of PG5 2.0.200 it isn't possible to switch on/off the relay outputs of the PCD3.WAC CPUs (PCD3.M2230A4T5, PCD3.M2330A4T1, PCD3.M2330A4T3, PCD3.M2330A
version 005 can be found on the PCD4.M1x0 pages. PCD4.M340 (obsolete): CPU0 has got the same firmware as a PCD4.M1x0, the latest version 005 can be found on the PCD4.M1x0 pages. CPU1 with LAN2 has the [...] (or in case a PC is used, by interpreting the tracewin files). This phenomenon can be observed on PCD1.M1x5, PCD2.M150, PCD2/4.M170 and PCS1 systems (with firmware which are supporting the "Secure S [...] appears if the used firmware on the CPU does not support the "active and non ACK" filter for the S-Web alarming functionality (e.g. a PCD2.M150 with firmware 0D3). Symptom Instead of the
4.M340 (obsolete): CPU0 has got the same firmware as a PCD4.M1x0, the latest version 005 can be found on the PCD4.M1x0 pages. CPU1 with LAN2 has the same firmware as a PCD6.T1xx, last version 005, only available on [...] (or in case a PC is used, by interpreting the tracewin files). This phenomenon can be observed on PCD1.M1x5, PCD2.M150, PCD2/4.M170 and PCS1 systems (with firmware which are supporting the "Secure S [...] appears if the used firmware on the CPU does not support the "active and non ACK" filter for the S-Web alarming functionality (e.g. a PCD2.M150 with firmware 0D3). Symptom Instead of the
a slow bus, only about 200 to 300 points can be handled by a PCD. A full RS 232 port is used for the link to the converter. ESPA 4 [...] PCD1.M130F650 , PCD2.M150F650 , PCD2.M170 , PCD4.M170Fx9 , PCD6 with Ethernet on request (one Ethernet TCP/IP interface per System) Coming soon PCD's must have a fixed IP address [...] /PG5 Products: xx7/Step7 Restrictions This is a variant of the Modbus protocol on Ethernet Modbus is supported by the Firmware of PCD2.M5xx0 and PCD
The PCD7.L600, L601 and L603 room controls units delivered since April 2009 are equipped with a different connection terminal in comparison with the units which are delivered before April 2009. The new units have the version 1.2 SV 1.08.
The PCD E-Line RIO's of the type: PCD1.Axxx-A20 PCD1.B1xxx-A20 PCD1.B5xxx-A20 PCD1.G2xxx-A20 PCD1.G2100-A10 PCD1.G5xxx-A20 PCD1.W5200-A20 have been delivered since cw 47 2022 with the new E-Line RIO FW 1.08.16 (or newer) and the top print FW 2.01.00 (or newer).
On PCD2.M480 it might happen that when a Online connection went offline and OnLine again that it doesn't work again: a message "No response" appears! In order to be able to connect again, it is necessary to plugg out and in again the programming cable PCD8.K111. This phenomenon is related to the way the DSR signal is managed on the serial port of your PC/Laptop! We have noticed this problem on some Dell Desktops.
