Your search returned 817 results

341. PCD3.A220 - Output module, 2×3 relays, 250 VAC/2 A

     Relevance:

      

     13%

     Digital output module, 2 × 3 relays, 250 VAC/2 A, 'make' contact, without contact protection

342. PCD3.A210 - Output module, 4 relays, 250 VAC/2 A

     Relevance:

      

     12%

     Digital output module, 4 relays, 250 VAC/2 A, 'break' contact, contact protection, (connector type A included)

343. PCD3.A210 - Output module, 4 relays, 250 VAC/2 A

     Relevance:

      

     12%

     Digital output module, 4 relays, 250 VAC/2 A, 'break' contact, contact protection, (connector type A included)

344. PCD3.A200 - Output module, 4 relays, 250 VAC/2 A

     Relevance:

      

     39%

     Digital output module, 4 relays, 250 VAC/2 A, 'make' contact, contact protection, (connector type A included)

345. PCD3.A200 - Output module, 4 relays, 250 VAC/2 A

     Relevance:

      

     39%

     Digital output module, 4 relays, 250 VAC/2 A, 'make' contact, contact protection, (connector type A included)

346. PCD3.27x

     Relevance:

      

     12%

     minimal system requirements are: PG5 2.0.200 PCD Firmware 1.16.48 Modules supporting a firmware update: PCD2.F26xx PCD2.F27xx PCD3.F26x PCD [...] minimal system requirements are: PG5 2.0.200 PCD Firmware 1.16.48 Modules supporting a firmware update: PCD2.F26xx PCD2.F27xx PCD3.F26x PCD [...] M-Bus on Saia PCD® PCD2.F27x0 and PCD3.F27x Introduction A PCD1.M2, PCD2.M5 or PCD

347. PCD3

     Relevance:

      

     7%

     of the PCD3.M6860. In PG5 it’s possible to activate at the same time BACnet on ETH1 and ETH2 but we strongly recommend to use/activate BACnet only on one of the two Ethernet ports to avoid a [...] be loaded again). All PCD1.M2 and PCD2.M5 systems can be equipped with a firmware 1.16. and more recent [...] address bound to an IP address. Does a PCD generate gratuitous ARP telegrams? No, a PCD (e.g. a PCD3, a PCD2.M5xxx or a PCD equipped with a PCD7.F655) does not generate gratuitous ARP telegrams when

348. PCD2.W340 - Analogue inp., 8 channels, 12 bits

     Relevance:

      

     13%

     Measurement parameter: - 0…10V - 0…2.5V - 0…20 mA - Pt/Ni1000 (default) - Pt1000: –50…+400°C - Ni1000: –50…+200°C

349. PCD2.W200 - Analogue inputs, 0…10 V, 10 bit

     Relevance:

      

     23%

     Analogue input module, 8 inputs (channels), resolution 10 bit, signal range 0 … 10 V, (the channels themselves not separated), plug-in type L (4 405 4847 0) included

350. PCD2.T8xx

     Relevance:

      

     11%

     Documentation Good to know The PCD2.T813Z42 is a variant of the PCD2.T813 and is compatible with the PCD2.T813 except for the DTMF functions. To use the PCD2.T813Z42 with the DTMF functions of the modem library, at least version 2.2.007 is required. The PCD2.T813Z42 is a 56k analog modem and supports the V90 standard, V92 is not supported. [...] Product Category Programmable controller PLC Accessories Modem PCD2