It is possible to configure the onboard inputs and outputs of the PCD3.M2xxx with the "device configurator". A download of this configuration is not stored.
The information provided in the history or the "Diagnostic file" of the PCD does not always give enough information for the firmware developpers to find the reason for e.g. a crash of a PCD. If more information is required in order to trace back a crash, a dump of the whole memory (SRAM, DRAM and FLASH) of a PCD can be done. This FAQ does apply to PCD1.M2, PCD2.M480, PCD2.M5xxx, PCD2.M45x0, PCD3 (including PCD3.Mxx60) and PCD7.D4xxxT5F (Programable MB-panels).
Starting with PG5 2.0 SP2 (PG5 2.0.200) there exists a dedicated installer for 64-bit versions of Microsoft Windows Vista, Windows 7 or Windows Server 2008. In case PG5 1.4 is installed on the same machine, the SComm driver of PG5 1.4.300 needs to be updated (with the installer delivered together with the setup of PG5 2.0.200 and later).
The AT command set of the PCD2.T813 features a way for getting information regarding the line quality. Also the transmission rate last used as well as the fastes used transmission rate will be shown.
When the 4 channels analog carte PCD2.W745 is used on a PCD3.T760 RIO module 6 registers are available on the master station. It is important to know that the 2 first registers contain the diagnostic bits of the 4 inputs channels!
Since the default MPI port is used for CAN or Profibus protocol on the PCD3.M6xx7 port 2 can be configured as MPI port
In order to use the S-Web Editor macros "S2F" (Save to File) for storing trend data to files on a PCD7.D412D MB Panels the S-WebEditor 5.15.02 delivered with PG5 2.0.210 is required. Additionally the firmware of the Panel must match (1.18.12 or later). A detailed description of the usage can be found in the "user's guide for the SVGA MB Panels" available on the support site.
Note that a Modem in PGU mode needs always a full RS 232 port.
called an image and can be is restored onto a compact flash (CF) card by using the free tool "easy Image Win 1.1" or onto a SD card by using the free tool "easy Image Win 2.0". Image files for CE web [...] autohide and the screen was calibrated for either a 12" or 15" panel. The image eWin__CE_SD2GB_D51x0WTA_1.0.0.1.esy has been designed for prototype (Part number on the label start with P) Web Panel image download area PCD7D51x0WTA010: After 11_2016 with black SD_Card Image file for eWin_CE_SD2GB_D5120WTA_2.0.1.0 Image file for eWin_CE_SD2GB_D5150WTA_2
