The system catalog mentionned 6 digital inputs (24 Volt, 4 x interrupts) and 2 digital outputs (2 x PWM, 24V 100 mA). But in reality only 4 digital inputs (not 6) are available at the moment and 2 digital outputs as mentionned in HW manual!
Up to 13 free configurable rows for configuration of the I/O data exchange area can be inserted in "HW Config".
The first generation of PCDs with integrated S-Web server did not support http-direct (e.g. the PCD1.M125, PCD1.M135, PCD2.M150, PCD2.M170, PCD2.M480) . Therefore the access of the S-Web Server must be realized using the free software "S-WebConnect" which is to be installed on a PC (accessing the PCD using e.g. Ether-S-Bus). Alternatively, an MB Panel can also access the S-Web Server (e.g. using Ether-S-Bus). However, it is important to know that only one S-Bus client can access the S-Web Server over Ether-S-Bus at the same time!
There is a possibility to update the firmware of a PCD2.F2xxx or PCD3.F2xx, in this FAQ it is explained how to proceed.
It's possible to open or close a connection of S-Web-Connect (WebConnect 2.x) to a PCD with the use of a URL address:
The PCD must be equipped with a PCD7.F8xx module and RAM is to be mounted on the memory socket, with the "memory use" set to RAM (the binding does not work with a Flash).
In PG5 SP1.2.130 the analogue module PCD3.W745 isn't implemented. To be able to configure the PCD3.W745 on a PCD3.RIO the latest *.gsd file is required.
The PCD3 Compact (PCD3.M2xxx) is available in the Network configurator from PG5 2.0 but not in the one from PG5 1.4 300.
There are several possibilities to access the content of an SD card (used with a PCD3.R600 or a PCD2.R6000).
If you want to downgrade a TCP/IP module from PCD7.F655 into a PCD7.F650/1/2 you have first to update the EEPROM of the PCD7.F655 before downgrading it. This update of the EEPROM is done for backwards compatibility reasons.
