There is a difference in the "SBC Format" between "old" xx7 CPU's (PCD2.M127, 157, 177) and Saia PCD® COSinus based CPUs (PCD3, PCD2.M5xxx7 and PCD2.M487). The way to read analogue values from PCD2/3.W2xx and PCD2/3.W100, W3x0, W500 in the "SBC-Format" is not the same.
synchronization of a PCD within a LAN without internet access (FAQ #101884) Solution: A Windows PC (or Windows Server) can be configured as an NTP server. The PCD's can read the time via SNTP from this NTP server. Problem: The clock of PCD's, located in a LAN without internet access should be synchronized over SNTP. Solution: If there is a PC on the same network, then this PC could be used as SNTP Server for the PCD's . The PCD's could read the time via SNTP from this NTP
Documentation Good to know The PCD2.T813Z42 is a variant of the PCD2.T813 and is compatible with the PCD2.T813 except for the DTMF functions. To use the PCD2.T813Z42 with the DTMF functions of the modem library, at least version 2.2.007 is required. The PCD2.T813Z42 is a 56k analog modem and supports the V90 standard, V92 is not supported. [...] Product Category Programmable controller PCD2: CPUs, flat design Txxx: Internal modems T
Documentation Good to know The PCD2.T813Z42 is a variant of the PCD2.T813 and is compatible with the PCD2.T813 except for the DTMF functions. To use the PCD2.T813Z42 with the DTMF functions of the modem library, at least version 2.2.007 is required. The PCD2.T813Z42 is a 56k analog modem and supports the V90 standard, V92 is not supported. [...] Product Index PCD2 Txxx: Internal modems T8xx General
(degrees for temperature and e.g. mV for the voltage inputs). Procedure In the S-Net configurator, select a PCD3.W200 for the module where the PCD2.W220Z12 is plugged Select the format [...] default with a spring clamp terminal block. Screw terminal blocks have to be ordered separately . PCD3 LIO and PCD2.M17x: to use addresses in the range 256 to 511, CPU's with production date 0331 [...] information of a PCD3.W745 on a PCD3.T760? (FAQ #101697) When the 4 channels analog carte PCD2.W745 is used on a PCD3.T760 RIO
(degrees for temperature and e.g. mV for the voltage inputs). Procedure In the S-Net configurator, select a PCD3.W200 for the module where the PCD2.W220Z12 is plugged Select the format [...] default with a spring clamp terminal block. Screw terminal blocks have to be ordered separately . PCD3 LIO and PCD2.M17x: to use addresses in the range 256 to 511, CPU's with production date 0331 [...] information of a PCD3.W745 on a PCD3.T760? (FAQ #101697) When the 4 channels analog carte PCD2.W745 is used on a PCD3.T760 RIO
101653 . Minimal firmware version for the Manager is 1.16.42 (PCD1.M2) and 1.16.45 (PCD2.M5 and PCD3), see FAQ 101640 . Minimal version of PG5 for configuring a PCD3.T665¦T666 is PG5 2.0 SP2 (PG5 2.0.200). When replacing a PCD3.T660 by a PCD3.T665 the user program needs to be adapted accordingly. I/O modules: The I/O modules are delivered per default with a spring clamp terminal [...] RIO PCD3.T66x there is a diagnostic flag available which can be used to detect whether the RIO Manager CPU is exchanging data with the RIO. However, when using PG5 2.0.200 this flag is not correctly
101653 . Minimal firmware version for the Manager is 1.16.42 (PCD1.M2) and 1.16.45 (PCD2.M5 and PCD3), see FAQ 101640 . Minimal version of PG5 for configuring a PCD3.T665¦T666 is PG5 2.0 SP2 (PG5 2.0.200). When replacing a PCD3.T660 by a PCD3.T665 the user program needs to be adapted accordingly. I/O modules: The I/O modules are delivered per default with a spring clamp terminal [...] RIO PCD3.T66x there is a diagnostic flag available which can be used to detect whether the RIO Manager CPU is exchanging data with the RIO. However, when using PG5 2.0.200 this flag is not correctly
power calculation of the I/O modules the Device Configurator from PG5 2.0. SP2 or later is to be used. PG5 2.0 Device Configurator does also feature a label creator for the I/Os on the RIO [...] . When replacing the PCD3.T660 Ethernet RIO with a PCD3.T665 or PCD3.T666 , the user program of the Manager has to be adapted [...] . Why doesn't the PCD3.T660 accept any configuration anymore? (FAQ #101289) In case the Ethernet RIO stays in a state
power calculation of the I/O modules the Device Configurator from PG5 2.0. SP2 or later is to be used. PG5 2.0 Device Configurator does also feature a label creator for the I/Os on the RIO [...] . When replacing the PCD3.T660 Ethernet RIO with a PCD3.T665 or PCD3.T666 , the user program of the Manager has to be adapted [...] . Why doesn't the PCD3.T660 accept any configuration anymore? (FAQ #101289) In case the Ethernet RIO stays in a state
