• PCD7.L1xx

  • S-Bus remote I/O's

Documentation

System Catalogue : Cabinet Components

Extract 26-215_A0500 System Catalogue : Cabinet Components

System Catalogue
Cabinet components

ENG18c .pdf 2.61 MB Download
FRA18c .pdf 2.62 MB Download
GER18c .pdf 2.62 MB Download
ITA18c .pdf 2.62 MB Download

PCD7.T161 & PCD7.T162 - Terminator-Box

Datasheet PP26-538 PCD7.T161 & PCD7.T162 - Terminator-Box

 

 

ENG07 .pdf 0.48 MB Download
FRA07 .pdf 0.48 MB Download
GER07 .pdf 0.48 MB Download
ITA07 .pdf 0.48 MB Download

DDC-PLUS-RIO Field-bus modules

Manual 26-764 DDC-PLUS-RIO Field-bus modules

 

 

DE01 Archive .pdf 1.02 MB Download
EN01 Archive .pdf 0.71 MB Download

These leaflets are more up to date than the manual and TI, please first refer to the leaflet.

Leaflet PCD7.L100

Tutorial 26-000 Leaflet PCD7.L100

GER04 - ENG04 .pdf 0.33 MB Download
ENG04 .pdf 0.17 MB Download
GER04 .pdf 0.16 MB Download

Leaflet PCD7.L101

Tutorial 26-001 Leaflet PCD7.L101

Product outphased

DE03 - EN03 Archive .pdf 0.16 MB Download

Leaflet PCD7.L110

Tutorial 26-002 Leaflet PCD7.L110

GER04 - ENG04 .pdf 0.30 MB Download
ENG04 .pdf 0.20 MB Download
GER04 .pdf 0.10 MB Download

Leaflet PCD7.L120 up to FW 3.1

Tutorial 26-003 Leaflet PCD7.L120 up to FW 3.1

DE02 - EN02 Archive .pdf 0.25 MB Download

Leaflet PCD7.L120 starting with FW 3.1

Tutorial 26-004 Leaflet PCD7.L120 starting with FW 3.1

GER03 - ENG03 .pdf 1.07 MB Download
ENG03 .pdf 0.33 MB Download
GER03 .pdf 0.31 MB Download

Leaflet PCD7.L121 up to FW 3.1

Tutorial 26-005 Leaflet PCD7.L121 up to FW 3.1

DE02 - EN02 Archive .pdf 0.16 MB Download

Leaflet PCD7.L121 starting with FW 3.1

Tutorial 26-006 Leaflet PCD7.L121 starting with FW 3.1

GER03 - ENG03 .pdf 0.77 MB Download
ENG03 .pdf 0.25 MB Download
GER03 .pdf 0.32 MB Download

Leaflet PCD7.L130

Tutorial 26-007 Leaflet PCD7.L130

ENG06 - GER06 .pdf 0.30 MB Download
ENG06 .pdf 0.16 MB Download
EN05 .pdf 0.14 MB Download

Decentralized I/O's for S-Bus

Technical Info PP26-339 Decentralized I/O's for S-Bus

DE06 Archive .pdf 6.24 MB Download
EN06 Archive .pdf 6.22 MB Download
FR07 .pdf 2.02 MB Download
IT06 Archive .pdf 6.26 MB Download
SV06 Archive .pdf 6.23 MB Download

Good to know

The firmware 3.1 for the PCD7.L12x adds a new feature: with this (and later) firmware version the register 17 can be used to define a lamella running time after stop position, see FAQ 101415.

 

Be careful if you place a lot of L1xx or L3xx S-Bus input modules on the same bus. The CPU is polling the input modules and they have a reaction time of about 10 ms. This leads to long reaction times when a lot of modules are present on the same bus, especially when the cycle time of the CPU is long. Cure: split the input modules over several serial ports, use a fast CPU.

PCD7 / Lxxx

  • It’s possible to connect a PT1000 temperature sensor to a PCD7.L60x room controller? (FAQ #101955)
  • It’s possible to force the fan speed of the room controller PCD7.L60x-1 from the application program? (FAQ #101927)
  • It’s possible to set the triac output Y1/Y2 of the PCD7.L60x-1 Room controller as 2 point output? (FAQ #101926)
  • What is the accuracy of the temperature sensor which is integrated in the PCD7.L64x? (FAQ #101889)
  • PCD7.L60x / PCD7.60x-1 Room controller; cooling or heating outputs Y1..Y4 are set to 0 if the fan is switched off. (FAQ #101861)
  • Why on the PCD7.L644 display the set point correction shows 0.5°K steps even as 0.4°K steps has been configured? (FAQ #101838)
  • Which inputs values needs the FBox 'Man AO' (L60x-1 Man AO) to control the Y3/Y4/PWMs outputs on a PCD7.L60x-1 controller? (FAQ #101837)
  • Communication on serial S-Bus fails while the AutoConfig Output of the Setup FBox stays '1'! (FAQ #101812)
  • PCD7.L6xx / PCD7.L79xN when working as Master/Slave with the application "2-pipe,CO" the change-over value of the Slave Room-Fbox is not transferred to the L6xx / L79xN . So the cooling output is not working. (FAQ #101791)
  • Warum wird im Master/Slave Betrieben von PCD7.L6xx Raumreglern in der Applikation "2-Rohr Change-over" der change-over Wert der Slave Room-Fbox nicht auf den Regler geschrieben, so dass der Slave den Kühlausgang nicht ansteuern kann? (FAQ #101790)
  • Hardware compatibility restrictions to respect when using PCD7.L645 with PCD7.L60x and L61x (FAQ #101740)
  • On my PCD7.L645W/B, why are only groups 3 and 4 controlled when I selected all the 4 groups? (FAQ #101739)
  • Why is the operation mode (OccMode) changing on a power down or configuration download to "1" (Reduced)? (FAQ #101683)
  • How to use the "Dew point" on L60x and L79x room controllers? (FAQ #101657)
  • How to link a remote control PCD7.L662 to the wireless receiver PCD7.L666? (FAQ #101635)
  • Points to be considered when using the Room controllers L60x in "Stand alone Mode" (FAQ #101514)
  • Why does the PCD7.L60x Room controller not work correctly in "Master/Slave" mode? (FAQ #101506)
  • Why is the PCD7.L60x occupancy output switching from 1 to 0 when changing a setpoint value? (FAQ #101455)
  • Can the PCD7.L12x rotate that lamellas back after the sun blinds moved down? (FAQ #101415)
  • Can I use a Ni 1000 L&S sensor in the Device Configurator or with a PCD7.L310? (FAQ #101330)
  • Which firmware version does my PCD7.L60x have? (FAQ #101298)
  • Why is the output K 1/2 switched off in intervalls even if the commanded output signal is 100%? (FAQ #101265)
  • Why can't I control the PCD7.L60x "Fan Speed" output in RIO mode? (FAQ #101264)
  • Wrong AC supply wiring can destroy PCD7.L79x (FAQ #101241)
  • PCD7.L611 LON support cooling with 0..10V output (FAQ #101233)
  • New connecting terminal on the PCD7.L600, L601 and L603 room controller units (FAQ #101228)
  • Wrong AC supply wiring can destroy PCD7.L602/3 (FAQ #101225)
  • Can I control a Belimo 6-way valve with a PCD7.L6xx? (FAQ #101182)
  • How many PCD7.L7xx room controllers can be connected to one PCD? (FAQ #101031)
  • There is an error in the help of the PCD7_L60x FBox (FAQ #100984)
  • Where from can I get connectors for PCD7.L62x light and sunblind extension modules? (FAQ #100967)
  • Why are the internal symbols of the FBoxes for PCD7.L60x not created automatically? (FAQ #100960)
  • Why is the heating output not high, even if the lower limit has been reached? The FBox status shows "Frost protection". (FAQ #100959)
  • How can I read the production date of the PCD7.L1xx, L2xx, L3xx, L4xx, L5xx modules? (FAQ #100917)
  • Problems when reading Input 5 to 8 of the PCD7.L100/L200 (FAQ #100887)
  • How can I modify the function presence of a standalone PCD7.L60x modules? (FAQ #100883)
  • How long does it take for a PCD7.L1xx or a PCD7.L3xx module to respond to an S-Bus telegram? (FAQ #100869)
  • Where from to get FBoxes for the obsolete "RAG-Einzelraumregelung" (FAQ #100820)
  • Why do the outputs on the PCD7.L120 RIO module not work? (FAQ #100722)
  • Communication errors PCD7.L400 (FAQ #100667)
  • Why do I have communication problems with the PCD7.L1xx, 2xx, 3xx, 4xx when using the "S-BUS Station" F-Box? (FAQ #100496)
  • How can I get informations (Baud rate, Status...) from the DDC Rail and Save modules? (FAQ #100430)
  • Roomcontroler PCD7.L72x (FAQ #100279)
  • PCD7.L723 (FAQ #100230)
  • PCD7.Lx00 doesn't respond anymore! (FAQ #100208)
  • EMC compatibility (FAQ #100161)
  • Bad communication on PCD7.Lxxx! (FAQ #100154)

The requested software / document is no longer marketed by Saia-Burgess Controls AG and without technical support. It is an older software version which can be operated only on certain now no longer commercially available products.

Download